User Guide

Technical Instructions RL 147 Positioning Relay
Document Number 155-038P25
April 1, 2005
Page 10 Siemens Industry, Inc.
Calibration,
Continued
Figure 6. Positioning Relay Mounted on the
No. 3 Damper Actuator.
Figure 7. Positioning Relay Mounted on the
No. 4 Damper Actuator.
Table 6. Mounting Kit 147-104 for the
No. 3 Damper Actuator.
Item Description Qty.
1 Mounting Bracket 1
2 Feedback Spring
(for 2-3/8" stroke)
1
3 Adjusting Screw 1-3/4" (44 mm)
long
1
4 Wing Nut 2
5 Lock Washer 1
6 Flat Washer 1
7 Spring Arm 1
8 3/8-24 Hex Nut 1
9 Clevis 1
10 No. 10-16 1/2" (13 mm) Slotted
Hex Screw
2
11 90° Elbow Connector 1
Table 7. Mounting Kit 147-314 for the
No. 4 Damper Actuator
Item Description Qty.
1 Mounting Bracket 1
2 Feedback Spring 1
3 Adjusting Screw 1-3/4" (44 mm)
long
1
4 Wing Nut 2
5 Lock Washer 1
6 Flat Washer 1
7 Spring Arm 1
8 3/8-24 Hex Nut 2
9 Clevis 1
10 No. 10-16 1/2" (13 mm) Slotted
Hex Screw
1