Specifications

90 Chapter 7
Understanding XMU+ Navigation
Working with Remote Telephone Access Messages
Users wanting to add, remove, or change a message remotely must have a good
understanding of the configuration and messages in the XMU+. The user must also
know the message number associated with each message they want to work with. This
information is collected during configuration design and implementation. See the
XMU+ QuickStart Guide for more information about messages.
To remotely access the XMU+
1. Dial the Remote Access telephone number. See Physical Specifications on page
21 for the appropriate telephone number.
When the XMU+ answers the line, it responds Enter Access Code.
2. Enter the appropriate Remote Access code, followed by # . See Physical
Specifications on page 21 for the appropriate access code.
The access code entered determines the functions and options that the user is
allowed access to. See Understanding XMU+ Remote Telephone Access on page
85.
The XMU+ responds Enter Command.
3. Enter the command number (see Remote Telephone Access Commands on page
89), and follow the XMU+ responses until the desired command has been
completed.
Note: If an invalid command or message number is selected, the XMU+ responds with the
following message:
Error - Invalid Command or Error - No or Invalid Message .
To disconnect from the XMU+
1. Complete the command.
2. Press 0, followed by #.
The XMU+ responds Done, and disconnects the line.
Note: If a remote command is not received within 30 seconds, the XMU+ automatically
disconnects from the line.