Specifications

XMU+ Installation and Maintenance Guide rev.07 87
Understanding XMU+ Remote Telephone Access
To change the default Remote Telephone Access code
Assigning a new, unique access code to each XMU+ is recommended to prevent
unauthorized telephone access to your system.
If multi-partitioning is enabled, a unique Remote Access code is required for each
partition in addition to the System code. See To check for system partitioning on page
84 and the XMU+ QuickStart Guide for more information about multiple access codes.
1. Press Enter to access the Main Menu.
2. Press the Right Arrow (three times) until you reach System
on the Main Menu, and press Enter.
3. Press Enter, hit the right arrow key & Enter to select Access
Codes.
4. Press Enter to select Remote Access.
5. Press Enter to select the first digit in the existing access code.
6. Use the Right Arrow or Left Arrow to select a new Remote
Access code digit, and press Enter.
7. Repeat Step 6 until the new access code is entered.
Access codes must have a minimum of 4 and a maximum of 8
digits.
8. Press Exit until the menu returns to the main display.
9. Record the new Remote Access code on the Delivery Checklist.
See The XMU+ Delivery Checklist on page 21.



