Specifications

86 Chapter 7
Understanding XMU+ Navigation
Setting Up XMU
+
Remote Telephone Access (optional)
If Remote Access will be used to communicate with the XMU+, the unit must be:
1. Cabled to a telephone line. See Connecting Remote Telephone Access (optional)
on page 51.
2. Set XMU+ to Remote Access mode using the XMU+ Front Panel.
See To set XMU+ Remote Telephone Access mode on page 86.
3. Programmed with a Remote Access code using the XMU+ Front Panel.
(optional). See To change the default Remote Telephone Access code on page 87.
To set XMU
+
Remote Telephone Access mode
Remote access mode is set to Ring Start (R) by default, and is rarely changed.
1. Press Enter to access the Main Menu.
2. Press the Right Arrow (three times) until you reach System
on the Main Menu, and press Enter.
3. Press the Right Arrow until you reach Remote Mode, and
press Enter.
4. Press the Right Arrow until you reach the desired remote
mode, and press Enter. You can choose from the following
options:
 R - Ring start with loop/shunt disconnect (default).
 RD - Ring start with DTMF disconnect.
 RB - Ring start with busy tone disconnect.
 RT - Ring start with dial tone disconnect.
 RQ - Ring start with quick answer.
5. Press Exit until the menu returns to the main display.
6. Record the Remote Access mode on the Delivery Checklist. See The XMU+
Delivery Checklist on page 21.


