Specifications

64 Chapter 6
Cabling the XMU+
Nortel SL-1
®
or Meridian-1
®
(option 1), DMS-100,
SL-100, CS1000 and Centrex
The Low Impedance option is required when 4 to 24 RAN trunks are connected in
parallel to a single channel.
Northern Telecom SL-1
®
or Meridian-1
®
(option 2)
The Low Impedance option is required when 4 to 24 RAN trunks are connected in
parallel to a single channel
PAB X
Signal
Announcer
Signal
Line 1
Pin-
Color
Line 2
Pin-
Color
Line 3
Pin-
Color
Line 4
Pin-
Color
Line 5
Pin-
Color
Line 6
Pin-
Color
Line 7
Pin-
Color
Line 8
Pin-
Color
Ring Ring
1 -
Blu/Wht
4 -
Brn/Wht
7 -
Org/Red
10 -
Slt/Red
13 -
Grn/Blk
16 -
Blu/Yel
19 -
Brn/Yel
22 -
Org/Vlt
Tip Tip
26 -
Wht/Blu
29 -
Wht/Brn
32 -
Red/Org
35 -
Red/Slt
38 -
Blk/Grn
41 -
Ye l /B l u
44 -
Ye l / B r n
47 -
Vlt/Org
CP/E CP1
27 -
Wht/Org
30 -
Wht/Slt
33 -
Red/Grn
36 -
Blk/Blu
39 -
Blk/Brn
42 -
Yel / O r g
45 -
Ye l / S l t
48 -
Vlt/Grn
Ground CP2
2 -
Org/ Wht
5 -
Slt/Wht
8 -
Grn/Red
11 -
Blu/Blk
14 -
Brn/Blk
17 -
Org/Yel
20 -
Slt/Yel
23 -
Grn/Vlt
PBX Operation Mode: Continuous Play (CP NO). See
About XMU+ Operating Modes on page 68 for more information.
Meridian-1: Connect announcer to NT8D14 Universal Trunk Card or NT5K19 or NT5K72AA. Configure Meridian-1 for an
Audichron Announcer. IMPORTANT: Do not connect MB lead. Software must be downloaded to card by
disabling, then re-enabling card
SL-1:
DMS:
Connect announcer to QP C74 Recorded Announcement Circuit Pack. Configure SL-1 for an Audichron
Announcer.
Connect announcer to NT2X72AA Card. Configure DMS for an Audichron Announcer. Connect announcer’s
Tip and Ring to the NT2X72AA card’s Tip 1 and Ring 1.
PAB X
Signal
Announcer
Signal
Line 1
Pin-
Color
Line 2
Pin-
Color
Line 3
Pin-
Color
Line 4
Pin-
Color
Line 5
Pin-
Color
Line 6
Pin-
Color
Line 7
Pin-
Color
Line 8
Pin-
Color
Ring Ring
1 -
Blu/Wht
4 -
Brn/Wht
7 -
Org/Red
10 -
Slt/Red
13 -
Grn/Blk
16 -
Blu/Yel
19 -
Brn/Yel
22 -
Org/Vlt
Tip Tip
26 -
Wht/Blu
29 -
Wht/Brn
32 -
Red/Org
35 -
Red/Slt
38 -
Blk/Grn
41 -
Ye l /B l u
44 -
Ye l / B r n
47 -
Vlt/Org
Battery* Start-
28 -
Wht/Grn
31 -
Red/Blu
34 -
Red/Brn
37 -
Blk/Org
40 -
Blk/Slt
43 -
Yel / G r n
46 -
Vlt/Blu
49 -
Vlt/Brn
Start/
MB
Start+
3 -
Grn/Wht
6 -
Blu/Red
9 -
Brn/Red
12 -
Org/Blk
15 -
Slt/Blk
18 -
Grn/Yel
21 -
Blu/Vlt
24 -
Brn/Vlt
CP CP1
27 -
Wht/Org
30 -
Wht/Slt
33 -
Red/Grn
36 -
Blk/Blu
39 -
Blk/Brn
42 -
Yel / O r g
45 -
Yel/Slt
48 -
Vlt/Grn
Ground CP2
2 -
Org/Wht
5 -
Slt/Wht
8 -
Grn/Red
11 -
Blu/Blk
14 -
Brn/Blk
17 -
Org/Yel
20 -
Slt/Yel
23 -
Grn/Vlt
PBX Operation Mode: Pulse Start/Level Return (PS/LR NO). See
About XMU+ Operating Modes on page 68 for more
information.
Meridian-1: Connect announcer to QPC74 Recorded Announcement Circuit Pack or NT8D14BA (or later) Universal Trunk
Card or NT5K19 or NT5K72AA. Software release X19 (or later) must be used when connecting to the Universal Trunk
Card.
Configure Meridian-1 for a Cook Electric 201 Announcer. Software must be down be downloaded to card by disabling,
then re-enabling card.