Specifications

38 Chapter 5
Installing the XMU+
Checking System Startup
At system startup, the XMU+ identifies the current system configuration. You should
watch the information displayed on the LCD to ensure that the XMU+ is working
correctly.
Since the system configuration information may be required at a later date for
maintenance and upgrades, you should record it in the Delivery Checklist. See the
Configuration Specifications section of The XMU+ Delivery Checklist on page 21.
To check system startup
1. Attach the XMU+ to the appropriate power supply.
2. Verify that the LCD illuminates.
3. Verify that the XMU+ identifies the current system configuration in the
following order:
 The current firmware version installed.
 Proper loading of messages and prompts.
 The total amount of recording time currently
installed.
 The amount of recording time that is currently
available.
 The date and time.
The date and time may have to be reset to show
the correct values. See To set time and date
(from the Front Panel) on page 96.