Specifications

36 Chapter 5
Installing the XMU+
Installing the XMU
+
Unit
Before installing the XMU+ unit, you should ensure that all system requirements have
been met (see Meeting System Requirements on page 16) and that all of the
appropriate line cards settings have been applied (see Applying Hardware Settings to
XMU+ Line Cards on page 27).
As well, you should ensure that the following tools, hardware, and accessories are
near:
 The XMU+ unit.
 Mounting brackets and screws.
 Philips screwdriver.
To install an XMU
+
in a rack
1. Ensure you have the mounting brackets.
2. Attach the rack mounting bracket to the XMU+ with the screws provided, as
shown below:
3. Install the XMU+ in the rack using the flanges of the mounting brackets.
Large Chassis
Small Chassis
flange
screws
(4 per side)
flange
screws
(4 per side)