Specifications

XMU+ Installation and Maintenance Guide rev.07 139
Detailed XMU+ Technical Specifications
Modem:
 Compatible with global PSTN (FCC / IC / CTR-21)
 56Kbps (V.90), 33.6Kbps (V.34), 14.4Kbps (V.32) +
other modes
 V.42 LAPM and MNP 2-4 error correction
 V.42bis and MNP 5 data compression
 Connector: RJ 11
Alarm:
 Inputs: contact closure or applied DC voltage up to +/-
60V
 Outputs: dry relay contacts (1 form “C” - NO/NC/
COM)
 Output contacts: 1.0 A @ 30V / 0.5A @ 60V
(60V maximum)
 Input current: 5 mA @ 60V (maximum)
Serial Ports:
 Type: RS-232 Transmit and Receive data (software
flow control required)
 Data Rate: 115 Kbps (maximum)
 Connector: RJ45 with proprietary pin-out
 Input Impedance (typ): 5 KΩ
 Input Voltage (low): -15 V to +1.2 V
 Input Voltage (high): +1.5 V to +15 V
 Output Voltage Swing (typ): +/- 5.4 V into 3 KΩ
 Protection (ESD): +/- 15KV Human Body
+/- 15KV IEC1000-4-2 Air Discharge
Network:
 Type: 10/100BaseTX Ethernet
IEEE 802.3 compliant (Auto Detect)
 Connector: RJ-45 connector with standard pin-out
 Impedance: 100Ω / matched for Category 5 UTP cable
 Protection: 1500 V RMS Hipot
2000 W / 100 A 8/20µs pulse
Tap e:
 Connector: 1/4" “microphone” jack
 Impedance: 10 KΩ
 Input level (AGC onset): 120mV
 Nominal output level: 180 mV RMS (10 KΩ load)
Technical Feature... Details...