Specifications

132 Chapter 10
Troubleshooting XMU+ Installation
configurations and messages. See the XMU+ QuickStart Guide for more
information.
 NO, the XMU+ will return to the Time/Date display, leaving messages and
configurations intact.
To reset unit to default factory settings (including flash memory)
Resetting the XMU+ to its original factory default settings should be performed only
as a last resort, when the XMU+ is behaving erratically and has not responded to any
other troubleshooting procedures.
The manner in which you perform a factory reset depends on whether or not the
XMU+ front panel is still active. If the front panel is:
 Still active, perform Factory Reset 1.
 Completely unresponsive, perform Factory Reset 2.
In either case, this procedure will erase ALL messages and delete ALL
configurations, and return the XMU+ to its original factory settings.
Factory Reset 1
1. Press Enter to access the Main Menu.
2. Press the Right Arrow to reach System on the Main
Menu, and press Enter.
3. Press the Right Arrow to reach System Reset, and
press Enter.
4. Press the Right Arrow to reach Factory Default, and
press Enter. XMU+ displays a message asking if you
are sure that you want to perform this reset.
5. Press Enter to perform the factory reset.
The XMU+ shuts down immediately, and then restarts.
CAUTION...
If you select YES, this
procedure will erase
ALL messages and
delete ALL
configurations.




TIP...
To cancel the factory
default command
and return to the
previous menu, press
Exit when XMU+
asks Are you sure?.