Specifications

118 Chapter 9
XMU+ Hardware Upgrades
4. Gently press the memory module down so that the connectors mate and the
plastic retainer snaps through the hole on the Control card.
5. Replace the Control card. See To install a new XMU+ Control card on page 112.
6. Bring the XMU+ back online. See To br ing the X MU+ online on page 108.
Once the XMU+ is powered up, it will automatically run a memory test and
display the available recording time.
7. Perform Factory Reset 1 to reset the XMU+. See To reset unit to default factory
settings (including flash memory) on page 132.
8. Restore the configuration and messages to the XMU+. See the XMU+
QuickStart Guide for more information.
connectors
plastic retainer
alignment arrows