Specifications

XMU+ Installation and Maintenance Guide rev.07 99
Testing Basic XMU+ System Health
To ping the IP address
Ethernet communication with XMU+ can be verified by conducting a communication
test from a PC with a LAN or direct Ethernet connection to the XMU+.
1. Choose Start > Run to display the Run window.
2. Type ‘command’ in the Open field and click OK to display a DOS window.
3. At the command line prompt, enter ‘ping IP Address of the XMU+’.
‘IP Address of the XMU+’ is the IP address assigned to the XMU+ in Assigning and
Testing IP addresses on page 98.
A successful communication will show a result similar to the following:
4. If the communication is unsuccessful, troubleshoot.