Specifications

92 Chapter 7
Understanding XMU+ Navigation
To change default language of operation (optional)
When the XMU+ is accessed remotely, the first response it gives is always in English
(Enter Access Code). The language it responds with from that point is also English,
unless the language of operation is changed to French, Spanish, German, or
Portuguese.
With single or multi-partitioned XMU+ units, each partition can be programmed to
respond with a different language.
1. Remotely access the XMU+. See Working with Remote Telephone Access
Messages on page 90 for more information.
2. When the XMU+ responds Enter Command, press 4.
3. Press the number for the language you want to use, followed by #:
 Press 1 # for English (default).
 Press 2 # for French.
 Press 3 # for Spanish.
 Press 4 # for German.
 Press 5 # for Portuguese.
The XMU+ will now use the selected language as its default language of
operation for Remote Access.