User`s guide

SIEMENS 5930/5935 Business Gateway
User’s Guide
Chapter 1 Product Specifications
Software Specifications for 5935
SIEMENS 7
Software Specifications for 5935
Bridging
• Transparent bridging including Spanning Tree
protocol (IEEE 802.1D)
• Bridge filters
Configuration Management
• Easy Setup Web Management Interface
• Microsoft
®
Windows configuration management
via SNMP
• TFTP download/upload of new software and
configuration files
• Performance monitor
• Dynamic event and history logging
• Administration through HTTP, SNMP, Telnet or
VT100 terminal
• Network boot uses the BootP server (RFC
2131, RFC 2132)
Routing
• TCP/IP with RIP1 (RFC 1058), RIP1 compatible
and RIP2 (RFC 1389) or static routing on the
LAN or WAN
• Novell® IPX with RIP/SAP (RFC 1552)
• DHCP client (RFC 2132)
• DHCP server - Automatic assignment of IP
address, mask, default gateway and DNS
server addresses to workstations (RFC 2131,
2132)
• DHCP relay agent (RFC 1542)
• DNS relay
• Multiple subnets on LAN
• Virtual routing
• Virtual Router Redundancy Protocol (RFC
2338)
Differentiated Services - Quality of
Service provisioning
• Weighted Fair Queuing (WFQ)
• Differentiated Services (DiffServ)
Dial Backup
• Failover to modem on console port
• Web Management Interface
• User selectable fail/restore criteria
• Optional modem connector (DB9 or DB25)
• Supports L2TP and IPSec tunnel failover
Asynchronous Transfer Mode (ATM)
• Encapsulation (IP, Bridging, and Bridge
Encapsulated Routing) (RFC 1483)
• PPP over ATM (LLC and VC multiplexing) (RFC
2364)
• PPP over Ethernet
• Classical IP (RFC 1577)
• AAL5 for data
• Multiple Virtual Circuits (VCs)
• Virtual Circuit (VC) traffic shaping (UBR, VBR,
CBR)
• L610 OAM F5 loopback