Product specifications

Efficient Networks
®
5930 Business Gateway
User Reference Guide
Chapter 2: Easy Setup
Efficient Networks
®
Page2-11
Selection of this option will allow only PPPoE traffic to be bridged, all other traffic will
be dropped.
Step3 Obtain an IP address, select from the two bulleted options below:
• IP configuration automatically from a DHCP server on the WAN Using
DHCP.
(1) Click the radio button to select this option.
• Configure IP Routing manually. This procedure requires the following:
(1) Click the radio button to select this option.
(2) Enter a unique IP Address in the field provided.
(3) Enter a unique Subnet Mask in the field provided.
If IP routing enabled is selected, click to select the following options:
• NAT Enabled - Network Address Translation (NAT) allows multiple
workstations on your LAN to share a single, public IP address. All outgoing
traffic appears to originate from the router’s IP address.
• Block Net BIOS Traffic - NetBIOS is a PC networking protocol that can
keep network connections open inadvertently. To avoid excess connection
charges, such traffic should be blocked on any metered network service.
Step4 Click Next to proceed with Easy Setup, Dynamic Host Configuration Protocol
configuration (see page2-14).
Task Complete