Product specifications

Efficient Networks
®
5930 Business Gateway
User Reference Guide
Chapter 2: Easy Setup
Efficient Networks
®
Page2-5
Step2 Click to select the following PPP Networking options:
• Bridging Enabled - Bridging will forward all traffic for remote hosts that is
not routed (non-IP) to the WAN. If Bridging Enabled is selected:
– Optional, click to select Only bridge PPPoE traffic. Proceed to Step3.
Selection of this option will allow only PPPoE traffic to be bridged, all other traffic
will be dropped.
• IP Routing Enabled - IP Routing will route all IP packets for remote hosts to
the WAN.
If IP Routing enabled is selected, click to select the following options:
– NAT Enabled - Network Address Translation (NAT) allows multiple
workstations on your LAN to share a single, public IP address. All
outgoing traffic appears to originate from the router’s IP address.
– Block Net BIOS Traffic - NetBIOS is a PC networking protocol that can
keep network connections open inadvertently. To avoid excess
connection charges, such traffic should be blocked on any metered
network service.
Step3 Click Next to proceed with Easy Setup, Dynamic Host Configuration Protocol
configuration (see page2-14).
Task Complete