Brochure

6
Damper Actuator Linkages for Retrofit
Solve your most difficult retrofit needs with a smaller footprint actuator that makes installation into tight spaces easier.
Replace a variety of competitor products for direct-coupled or indirect-mounted applications.
Retrot Solutions:
Universal Mounting and Crankarm Adapter Kits
Description Part Number
The ASK71.1U foot mount kit with the GCA actuator series is
provided with hole patterns used to replace the Honeywell™ foot
mount Mod motor series . Kit includes everything you need for this
replacement except damper rod. This kit is also compatible with
the GBB and GIB actuator series.
ASK71.1U
The ASK71.11 Universal mounting kit attaches a GMA or GEB
actuator to the oor or frame of the damper. This universal foot
and frame mount kit allows for easy retrot to common foot
mounted crank arm style actuators. Kit includes everything you
need for installation except the damper rod.
ASK71.11
The ASK71.4 and the ASK71.14 mounting kits allow rigid
mounting of GCA/GBB/GIB actuators or GMA/GEB actuators
respectively to rigid surfaces where space is a constraint and a
linear stroke is required. The damper push rod is not included.
ASK71.4
ASK71.14
The ASK71.3 and the ASK71.13 mounting kits allow direct
mounting of GCA/GBB/GIB actuators or GMA/GEB actuators
respectively and also drive adjacent dampers with the crank
arm assembly mounted under the self-centering shaft coupling.
Damper push rod is not included.
ASK71.3
ASK71.13
The ASK73.1 mounts dual GIB actuators and GCA 2-position,
oating or GCA15 series actuators. The ASK73.2U mounts dual
GCA16 (standard 0-10Vdc modulating actuators) . Both tandem
mounting brackets are designed for use when the application
requires high torque and units are mounted on the same side of
the damper shaft.
ASK73.1
ASK73.2U
The ASK71.9 Universal crank arm is designed for linear
applications requiring connection to the damper shaft when
ball joint connection is not possible. The damper push rod is not
included.
ASK71.9
The 985-124 is a 500 ohm resister kit designed to convert a
4-20mA signal to a 2-10Vdc signal .
985-124
Simplify installation with OpenAir
®
damper actuators