Manualshelf

Data Sheet for Product

ManualsBrandsSiemens ManualsRoom controlsLRC Electronic VAV with HW Reheat and Two Venturi Air Valves (One Supply, One Exhaust) - Analog Output Installation Instructions
12345678910
Wiring Diagram
Terminal Fan
Discharge Air Temp
10K thermistor
Condensate overflow
Space RH
Mixed Air Temp
10K thermistor
Terminal Cool coil opt
Spare Output
Fan Status
Terminal CW Coil
Exhaust Fan
High Speed Term Fan
OA Damper
Terminal HW Coil
Terminal CW Coil
Spare input
Terminal Heat coil opt
Terminal HW Coil
Note: Route wiring from either the bottom opening when using a J-box or
from the base sides as shown in the picture when flat or din rail mounting.
The image above is for illustrative purposes only.
Wiring Recommendations:
IN and AO: 20 to 22 AWG
DO: 18 to 22 AWG
Power: 16 to 18 AWG
LON Network: 22 AWG Level 4
Transformer Requirements:
Type: Class 2, 24 VAC, 50/60Hz
Figure 2. Predator Wiring Diagrams.
Document No. 588-153 Page 7 of 12