Texas Instruments og CTI CPU I/O Power Supply 5TI, 304, 305, PM 550, 505, 500, 565 m.m. stort udvalg samt opgradering til CTI 5TI, 304, 305, PM 550, 505, 500, 565 m.m. stort udvalg samt opgradering til CTI 5TI, 304, 305, PM 550, 505, 500, 565 m.m. stort udvalg samt opgradering til CTI Batterier Reparationer foretages på ca. 5 uger eller ombyttes omgående.
CTI 505 System CTI 505 System 2500 Series Controllers FEATURES Replace all Siemens® 545 and 555 models Built-in Ethernet and USB ports for programming z Built-in SD Flash card for program storage z Built-in Profibus and RS485 Remote I/O on C200, C300, and C400 models z Up to 3Mbytes memory, 8192 I/O points, 256 PID loops and 512 alarms, depending on model z Compatible with 505 Workshop, Tisoft, and APT z z 2500 Series Controllers Preliminary Product Bulletin SPECIFICATIONS Ports: Ethernet, 100Mbit, RJ
APTnet APTnet Finally! – Use APT® over Ethernet using Windows and the CTI 2572-A Overview - Application Productivity Tool (APT®) is the system of choice for development and operation of many process control applications using 505. However, as a legacy DOS application, APT® has always been limited to connecting to the PLC using a serial port. With APTnet you can now use APT® to communicate with any 505 system in your plant using Ethernet and the CTI 2572-A.
Table of Contents Table of Contents Table of Contents Functional Product Index Siemens®-to-CTI Product Cross Reference List Products (in Numerical Order) V VI IX 1 - 29 V 0907 GreenMatic | Lundeager 24 | 2791 Dragør | Tel: 7020 4840 | Fax: 7020 4847 | www.greenmatic.dk GreenMatic I Lundeager 24 I 2791 Dragør I Tel. 7020 4840 I Fax 7020 4847 I www.greenmatic.
Functional Product Index Functional Product Index CPUs 2500-C100 CPU with 128K User Memory 2500-C200 CPU with 258K User Memory 2500-C300 CPU with 512K User Memory 2500-C400 CPU with 3072K User Memory Bases 2500-R4 Four-Slot Base 2500-R8 Eight-Slot Base 2500-R16 Sixteen-Slot Base Power Supplies 2510 125VDC Power Supply 2512 75-Watt AC Power Supply 2513 24VDC Power Supply 2515 100-Watt AC Power Supply Remote Base Controllers 2500-RBC Profibus Remote Base Controller 2500-RIO RS-485 Remote Base Controller Com
Functional Product Index (continued) Functional Product Index Digital Inputs (continued) 2588-8 8-Point Universal Input Module 2589-A 8/16/32-Point Universal Input Module Digital Outputs 2590-A 16-Point Isolated 20-132 VAC Output Module 2590-EF 16-Point Isolated 20-132 VAC Output with Front Panel Accessible Fuses 2591-A 16-Point Isolated 11-146 VDC Output Module 2591-EF 16-Point Isolated 11-146 VDC Output with Front Panel Accessible Fuses 2595 16-Point TTL/Word Output Module 2596-8 8-Point 11-125 VDC Outp
Functional Product Index (continued) Functional Product Index Temperature Inputs 2551-A 8-Channel Isolated Thermocouple Input Module 2552-A 8-Channel Isolated RTD Input Module 2556 16-Channel Isolated Thermocouple Input Module 2557 16-Channel RTD Input Module 2559-RTD 8-Channel RTD Input Module 2559-TC 8-Channel Thermocouple Input Module High Speed Counters 2502 High Speed Counter Encoder Module 2553-A 2-Channel Mag Meter Input Module 2554-A 4-Channel Isolated High Speed Counter Module Vibration Monitoring
® Products CTI Replacement Model for Siemens CTINumbers Replacement Model Numbers for Siemens Products Siemens® Model # CTI Replacement Model # Siemens® Model # CTI Replacement Model # 505-CP2572 2572 or 2572-A 505-4716 2596 / 2597 505-2555 2555-A 505-4732 2597 505-2556 2556 505-4808 2598 / 2598-8 / 2599 505-2557 2557 505-4816 2598 / 2599 505-2571 2573-MOD 505-4832 2599 505-2580 2580 505-4908 2534 505-2590-A 2590-A 505-4916-A 2532 505-4008-A 2588-8 / 2589-A 505-4932-A 253
CTI Replacement Model Numbers for Siemens® Products CTI Replacement Model Numbers for Siemens Products Siemens® Model # CTI Replacement Model # 505-7038 2559-RTD 545-1101 2500-C200 545-1102 2500-C200 545-1103 2500-C100 545-1104 2500-C200 545-1105 2500-C100 545-1106 2500-C200 555-1101 2500-C300 555-1102 2500-C400 555-1103 2500-C300 555-1104 2500-C400 555-1105 2500-C300 555-1106 2500-C400 Siemens® Model # CTI Replacement Model # X 0907 GreenMatic | Lundeager 24 | 2791 Dragør | T
2500-C100, 2500-C200 2500-C100, 2500-C200 2500-C100 CPU with 128K User Memory The 2500-C100 CPU provides discrete, analog, loop, advanced mathematical and high-speed sequential control capability for your CTI 2500 Series or Simatic® 505 control system.
2500-C300, 2500-C400 Modules 2500-C100, 2500-C200 2500-C300, 2500-C400 2500-C300 CPU with 512K User Memory The 2500-C300 CPU provides discrete, analog, loop, advanced mathematical, and high-speed sequential control capability for your CTI 2500 Series or Simatic® 505 control system.
2500-R4 / R8 / R16 , 2500-RBC 2500-R4/R8/R16, 2500-RBC 2500-R4 / 2500-R8 / 2500-R16 Four, Eight & Sixteen Slot Base The 2500-R4 / R8 / R16 provides four, eight or sixteen slots for industrial I/O for your CTI 2500 Series or Simatic® 505 system. The bases provide space for a 3-slot wide power supply, a dual-wide CPU or Remote Base Controller (RBC), and slots for up to 16 I/O modules. Mounting may be achieved by front or rear mounting hardware.
2500-RIO, 2501 2500-RIO, 2501 2500-RIO RS-485 Remote Base Contoller The 2500-RIO RS485 Remote Base Controller allows control of a remotely-located CTI 2500 Series or Simatic® 505 I/O base over a twisted-pair RS485 cable up to 1000m from the CPU.
2502, 2505 2502, 2505 2502 High Speed Counter Encoder Module Coming in 2007 The 2502 is a high-speed counter module designed to count incoming pulses from external sensors and provide process control outputs based on count status.
2507, 2510 2507, 2510 2507 Vibration Monitoring Module The 2507 Vibration Monitoring Module provides 8 channels of accelerometer data for vibration monitoring. The module provides overall RMS, peak-peak, DC-bias, and spectral vibration levels to the PLC for each channel.
2512, 2513 2512, 2513 2512 75-Watt AC Power Supply The 2512 is a 120/240VAC Power Supply designed for CTI 2500 Series or Simatic® 505 PLCs. It provides up to 75 watts of power for use by the PLC CPU and I/O modules. Features: Replaces Siemens® 505-6660, 505-6660-A, and 505-6660-B 90-264VAC, 47-63 Hz single phase input power Up to 75 watts @ +5VDC to PLC CPU and I/O modules 2513 24VDC Power Supply The 2513 is a 24VDC Power Supply designed for CTI 2500 Series or Simatic® 505 PLCs.
2515, 2530 2515, 2530 2515 120 VAC Power Supply The 2515 is a 120 VAC power supply for CTI 2500 Series or Simatic® 505PLCs. The 2515 provides up to 100 watts of power for use by the PLC CPU and I/O modules.
2531, 2532 2531, 2532 2531 32-Point Form-A Relay Output Module The 2531 module provides 32 Form-A relay outputs for CTI 2500 Series or Simatic® 505 I/O base. The module uses relay output circuits to switch on or off external devices such as pilot lamps, motor starters, or solenoids. The 2531 is designed to switch externally supplied 15 to 240 VAC and 15 to 30 VDC.
2534, 2541 2534, 2541 2534 8-Point Form-C Relay Output Module The 2534 module provides 8 isolated Form-C relay outputs for the CTI 2500 Series or Simatic® 505 I/O base. The 2534 is designed for high current applications such as switching motor starters. It is also designed for 125 VDC (nominal) low level current applications and is especially suited for applications in power utility substations.
2550-A, 2551-A 2550-A, 2551-A 2550-A 8-Channel Isolated Analog Input Module The 2550-A is a high-speed 8-channel isolated analog input module compatible with the CTI 2500 Series or Simatic® 505 I/O base. The 2550-A translates analog input signals into an equivalent digital word.
2552-A, 2553-A 2552-A, 2553-A 2552-A 8-Channel Isolated RTD Input Module The 2552-A is a high-speed 8-channel isolated RTD input module compatible with the CTI 2500 Series or Simatic® 505 I/O base. The 2552-A translates RTD input signals into scaled temperature values and millivolt input signals into equivalent digital words.
2554-A, 2555-A 2554-A, 2555-A 2554-A 4-Channel Isolated High Speed Counter Module The 2554-A is an isolated 4-channel high-speed counter input module. Each channel can operate in one of three selectable modes: frequency, period, or general counter. In addition, two channels may be configured together for quadrature mode operation. Features: Single-wide 4-channel high-speed counter Operates in frequency, period, or counter mode External gate and reset inputs on each channel External 1.
2556, 2557 2556, 2557 2556 16-Channel Isolated Thermocouple Input Module The 2556 is a high-speed 16-channel isolated thermocouple input module compatible with the CTI 2500 Series or Simatic® 505 I/O base. The 2556 translates millivolt level signals from the thermocouple element into a scaled temperature value. Multiple thermocouple types are supported as well as millivolt inputs.
58, 2559-RTD 2558, 2559-RTD 2558 8-Channel Analog Input Module The 2558 is an 8-channel analog input module compatible with the CTI 2500 Series or Simatic® 505 I/O base. The 2558 translates analog input signals into equivalent digital words. It is fully compatible with all versions of the Siemens® 545 and 555 PLCs.
2559-TC, 2560-A 2559-TC, 2560-A 2559-TC 8-Channel Thermocouple Input Module The 2559-TC is a high-speed, 8-point thermocouple input module which translates millivolt level signals from the thermocouple element into a scaled temperature value in a CTI 2500 Series or Simatic® 505 I/O base. Thermocouple types J, K, T, E, R, S, N, and millivolts are supported.
2562, 2572 2562, 2572 2562 8-Channel Analog Output Module The 2562 is a low-cost, high-speed, 8-channel analog output module compatible with the CTI 2500 Series or Simatic® 505 I/O base. The 2562 translates digital words from the controller into equivalent analog outputs.
2572-A, 2572-AF 2572-A, 2572-AF 2572-A Fast Ethernet TCP/IP Adapter The 2572-A Ethernet TCP/IP Adapter is the next generation Ethernet interface module for CTI 2500 Series or Simatic® 505 controllers. The 2572-A provides connectivitly to networks using IEEE 802.3, Ethernet II and Transmission Control/Internet Protocol standards, at 10M or 100M speeds.
2572-DDS2, 2572-OPC 2572-DDS2, 2572-OPC 2572-DDS2 Ethernet DDE Server The 2572-DDS2 DDE Server provides data exchange between DDE client applications and CTI 2500 Series or Simatic® 505 PLCs using the CTI 2572 or 2572-A Ethernet module.
2573-MOD, 2576 2573-MOD, 2576 2573-MOD Serial Interface Adapter with MODBUS The 2573-MOD is a microprocessor-based communications adapter for CTI 2500 Series or Simatic® 505 controllers. The 2573-MOD provides support for communicating with plant floor devices such as modems, bar code readers, scales, displays, printers, and other PLCs. Features: Provides 4 serial ports, each providing RS-422, RS-485, and RS-232 electrical interfaces. All ports operate concurrently and independently.
2577, 2580 2577, 2580 2577 Profibus DP Slave Adapter The 2577 provides the ability to read any PLC V, WX, X, and C memory location over Profibus.
2580, 2581, 2581 2582 2581, 2582 2581 16-Point Isolated 12-56 VDC Input Module The 2581 16-point discrete input module accepts sixteen discrete isolated 12-56 VDC inputs to the CTI 2500 Series or Simatic® 505 I/O base.
2585, 2588-8 / 2589-A 2585, 2588-8/2589-A 2585 16-Point TTL / Word Input Module The 2585 16-point TTL input module accepts sixteen TTL inputs to the CTI 2500 Series or Simatic® 505 I/O base.
2590-A, 2590-EF 2590-A, 2590-EF 2590-A 16-Point Isolated Discrete 20-132 VAC Output Module The 2590-A 16-point discrete output module provides sixteen isolated outputs from the CTI 2500 Series or Simatic® 505 I/O base. The 2590-A is designed to switch externally supplied 20 to 132 VAC. Features: Replaces Siemens® 505-2590-A Supports sourcing and sinking applications 2.
2591-A, 2591EF 2591-A, 2591-EF 2591-A 16-Point Isolated 11-146 VDC Output Module The 2591-A 16-point discrete output module rovides sixteen isolated outputs from the CTI 2500 Series or Simatic® 505 I/O base. The 2591-A is designed to switch externally supplied 11 to 146 VDC. Features: Supports sourcing and sinking applications 1.
2595, 2596-8 / 2596 / 2597 2595, 2596-8/ 2596/ 2597 2595 16-Point TTL / Word Output Module The 2595 16-point TTL output module provides sixteen TTL driven outputs from the CTI 2500 Series or Simatic® 505 I/O base.
2598-8 / 2598 / 2599, 3102 APTnet2598-8/ 2598/ 2599, 3102 APTnet 2598-8 8-Point AC Output Module 2598 8/16-Point AC Output Module 2599 8/16/32-Point AC Output Module These modules provide 8, 16 or 32 11-240 VAC outputs from the CTI 2500 Series or Simatic® 505 I/O base. The solid-state output circuits can be used to switch on or off external devices such as pilot lamps, motor starters, or solenoids.
3102 3570A, APTnet, 5250-TI5 3570A 3570-A, 5250-TI5 3570A Ethernet Switch The 3570A Ethernet Switch is a 5 port Industrial Ethernet Switch designed specifically for providing network access to small clusters of factory floor equipment. It withstands harsh production requirements and features spacesaver DIN rail mounting and a redundant power supply connection.
2500-IADP, 3102 APTnet, 2500-PADP 3570A 2500-IADP. 2500-PADP 2500-IADP I/O Adapter for Series 500 The 2500-IADP is an I/O Adapter which allows the use of CTI 2500 Series I/O modules in Texas Instruments Series 500 I/O bases. It provides a transparent path for upgrading old Series 500 systems without the requirement to completely replace the system.
CPU opgradering Hvis 520/530 for for HvisdinTI din TI 520/530CPUer CPU blevet er blevet langsom eller dens kapacitet blevet langsomell er dens kapacitetenblevet for for så lille, så opgrader/konverter lille opgrader/konverter den. den. Løsningengligger er både Løsningenli ger ligelige for, for, og erogbåde økonomisk teknisk fornuftig! økonom isk ogog teknisk fornuftig! RBC (Remote Base Controller) 500-5114-B er den helt rigtige genvej til højere hastighed og øget kapacitet.
FasT r ak FasTrak FasTrak SOFTWORKS, INC. SOFTWORKS, INC. automation Continuum software solutions for industrial Continuum software solutions for industrial automation FasTrak Releases PLC WorkShop for Siemens 505 v3.60, SP3 FasTrak Releases PLC WorkShop for Siemens 505 v3.60, SP3 FasTrak SoftWorks, Inc. is pleased to announce the newest release of PLC WorkShop for Siemens 505 Version 3.60, SP3, product on the market that supports Windows operating systems FasTrak SoftWorks, Inc.
FasTrak FasTrak Continuum software solutions for industrial automation SOFTWORKS, INC. 505 WorkShop vs. TISOFT Windows Compatibility Us: Designed and tested under Windows 95, 98, NT, 2000, Millenium, and XP. Them: Known problems with various Windows versions. Particularly Windows 2000 and XP.
FasTrak List Prices Single User License Part# P-SM505-CW – 16.670,00 Kr. Ten Pack Site License (Keyless) Part# P-SM505-1W – 134.400,00 Kr. Eight User License Part# P-SM505-8W – 74.665,00 Kr. Unlimited Site Licenses (Keyless) Part# P-SM505-SW – 224.000,00 Kr. 1 Year upgrade Licens Part# A-SM505-CR – 6.685,00 Kr. Site Licenses Keyless site licenses are available. No more tracking or losing hard keys or soft key authorizations.
GreenMatic Produkt applikation Lundeager 24 - DK-2791 Dragør Phone: +45 7020 4840 Fax: +45 7020 4847 E-mail: gm@greenmatic.dk Web: www.greenmatic.dk Konverteringsskema TI 500 opgraderet til TI505 5451106 eller 5551105 1106 CTI2581 CTI2531 RS 485 Eksisterende TI 500 Eksisterende TI 500 5005114-B 5005114-B GreenMatic – CVR 25560159 – telefax +4570204847 – BG Bank, Reg. nr.
GreenMatic Produkt applikation Lundeager 24 - DK-2791 Dragør Phone: +45 7020 4840 Fax: +45 7020 4847 E-mail: gm@greenmatic.dk Web: www.greenmatic.dk Konverteringsskema TI 500 opgraderet til TI505 5451106 el. 5551105 1106 CTI2581 CTI2531 Profibus DP Eksisterende TI 500 Eksisterende TI 500 5006870 5006870 GreenMatic – CVR 25560159 – telefax +4570204847 – BG Bank, Reg. nr.
Konverteringsskema Konverteringsskema TI 530-545-110X Eksisterende anlæg Konverteret anlæg GreenMatic 0907 Lundeager 24 DK-2791 Dragør Tlf. 7020 4840 Fax 7020 4847 Mail gm@greenmatic.
Konverteringsskema Konverteringsskema 530 – CTI 505 Eksisterende anlæg Konverteret anlæg 2500 – CX00 2500 – R4/8/16 CTI - 2512 C P P S U Profibus DP I O C C C P U 5 3 0 500-BASE P S D B C 500-BASE P S D B C 500-BASE P S osv. 500-BASE 500-BASE P R S B C R P B S C 500-5840 500-2151-A 500-5114-B P R S B C 500-5840 500-2151-A 500-5114-B 505-BASE 2500 – R4/8/16 CTI - 2512 2500 - RIO osv. GreenMatic 0907 Lundeager 24 DK-2791 Dragør Tlf. 7020 4840 Fax 7020 4847 Mail gm@greenmatic.
Konverteringsskema Konverteringsskema 530 – 505 Eksisterende anlæg Konverteret anlæg 505-6504/08/16 505-6660 545-1106 C P P S U Profibus DP I O C C C P U 5 3 0 500-BASE P S D B C 500-BASE P S D B C 500-BASE P S osv. 500-BASE 500-BASE P R S B C R P B S C 500-5840 500-2151-A 500-5114-B P R S B C 500-5840 500-2151-A 500-5114-B 505-BASE 5056504/08/16 505-6660 505-6851-B osv. reenMatic 0907 undeager 24 DK-2791 Dragør Tlf. 7020 4840 Fax 7020 4847 Mail gm@greenmatic.
Konverteringsskema PM 550 - CTI 505 5MT-50 Konverteret anlæg 5MT-50 0408 Eksisternede anlæg
Konverteringsskema Konverteringsskema 560/565 – CTI 505 Eksisterende anlæg Konverteret anlæg C P P S U 560/565 2500 – CX00 2500 – R4/8/16 CTI - 2512 Profibus DP D P B S C P R B S C Blå Belden 500-5606 D P B S C P R B S C 500-5114B D P B S C P R B S C 500-5114B P R B S C 500-5114B P D S B C D P B S C P R B S C 500-5114B GreenMatic 0907 Lundeager 24 DK-2791 Dragør Tlf. 7020 4840 Fax 7020 4847 Mail gm@greenmatic.
Konverteringsskema Konverteringsskema 560/565 - 505 Eksisterende anlæg Konverteret anlæg C P P S U 560/565 555-110X 505-6660 505-65XX Profibus DP D P B S C P R B S C Blå Belden 500-5606 D P B S C P R B S C 500-5114B D P B S C P R B S C 500-5114B P R B S C 500-5114B P D S B C D P B S C P R B S C 500-5114B GreenMatic 0907 Lundeager 24 DK-2791 Dragør Tlf. 7020 4840 Fax 7020 4847 Mail gm@greenmatic.
2500-PADP Product Bulletin 2500 Series PLC System 2500-PADP Power Supply Adapter for Series 500 Description The 2500-PADP is a Power Supply Adapter which allows the use of CTI 2500 Series Power Supplies in Texas Instruments Series 500 I/O bases. It provides a transparent path for upgrading old Series 500 systems without the requirement to completely replace the system. Failed 500 Series Power Suplies can be replaced with CTI 2500 Series supplies.
2500-PADP Installation Instructions 1. Remove the existing Series 500 Power Supply from the base 2. Remove the plastic power supply housing (held in place by two screws. 3. Install the 2500-PADP metal housing in place of the old plastic housing. Secure with two retaining screws 4. Install the new 2500 Series power supply in the housing, secure the thumb screws, and attach input power. WARNING: Disable all power to the Series 500 base before installing or removing the Power Supply Adapter.
PLC Workshop for Siemens 505 PLC WorkShop ™ for Siemens 505 ™ is one of the world’s most powerful and exciting programmable logic controller (PLC) programming applications. It supports the entire line of Siemens Simatic ® / TI PLCs, is easy to use, has built-in SCADA capabilities, has the ability to track program changes (Activity Audit Trail), and offers powerful security utilizing NT authentication.
PLC Workshop for Siemens 505 With PLC WorkShop for Siemens 505 you can: Open several online and / or offline programs simultaneously Quickly upload and download logic and update data Import TISOFT files in seconds and use familiar TISOFT hotkeys Track addresses through convenient cross referencing Choose from numerous print options including Print Preview PLC WorkShop for Siemens 505 offers complete support of: Relay Ladder Logic (RLL) Special Function Programs and Subroutines Alarms and Loops Power Math f
PLC Workshop for Siemens 505 SPECIFICA SPECIFICATION TION S SPECIFICATIONS TIONS Customer Ser vice When you contact us for support, you will receive immediate and accurate solutions to your questions resulting in less downtime. You Y will have access to the engineers who design our software packages. Site Licenses Keyless site licenses are available, which eliminate tracking and losing keys.
PLC Workshop for Siemens 505 Competitor Comparison Site License Licensess Keyless site licenses are available. No fear of tracking or losing har hardd keys; no soft key authorizations authorizations.. Product Upgrade Upgradess Regular product upgrades are available available.. PLC WorkShop fo forr Siemens 50 5055 SoftShop TISOFT Improved continuall continually, y, averaging two new feature releases per year. year. You will be notified via email when new feature releases ar You aree available.
