User Manual

ManualsBrandsSiemens ManualsBuilding automationBACnet Router PXG3.M and PXG3.L Engineering and configuration

CM2N8187en_05 TXI2.OPEN, TXI2-S.OPEN TX Open RS232/485 modules Siemens

2019-01-14 Building Technologies

Nein, gibt es nicht

TX-I/O™; Desigo™

Open

Open RS232/485 modules (TXI2.OPEN, TXI2-S.OPEN)

To integrate third

-party systems and devices in Desigo (V4.1 or higher)

●

Platform to integrate third-party systems and device to the Desigo building automa-

tion and control system Desigo (Version 4 or higher)

●

Suitable for operation using predefined applications from Siemens or using in-

house

developed applications

●

TXI2.OPEN supports up to 160 data points

●

TXI2-S.OPEN supports up to 40 data points

●

Compact construction per DIN 43 880

●

Easy installation and setup

– Plug-in screw terminal

– Power from Island bus (DC 24 V)

●

Simple, fast diagnostics

●

Two Ethernet ports (Hub Functionality)

●

Reset (power) push button

Summary of content (8 pages)

PAGE 1
Nein, gibt es nicht TX-I/O™; Desigo™ Open TX Open RS232/485 modules (TXI2.OPEN, TXI2-S.OPEN) To integrate third-party systems and devices in Desigo (V4.1 or higher) ● Platform to integrate third-party systems and device to the Desigo building automation and control system Desigo (Version 4 or higher) ● Suitable for operation using predefined applications from Siemens or using in-house developed applications ● TXI2.OPEN supports up to 160 data points ● TXI2-S.
PAGE 2
Application Integrates third-party systems and devices in Desigo (V4.1 or higher) Functions The TX Open RS232/485 module integrates third-party systems via RS232 or RS485 interface to the Desigo building automation and control system. The required applications are loaded onto the module via the USB interface.
PAGE 3
Technical and mechanical design Overview A Plug-in screw terminal for RS232 and RS485 (Changeover via software) Terminal 1 2 3 Mechanical properties Housing RS232 RS485 TX + RX – GND (Potential equalization) B LED "RUN" Power OK C LED “COM” Communication (RS) D Know to set module address E Bus connector F Attachment slider for standard rails G RJ45 Ethernet connections H Reset (power) push button • The housing complies with DIN 43880 and is 96 mm wide.
PAGE 4
Ethernet interface (Hub Functionality) NOTICE We highly recommend that you do not attach cables to the Ethernet port if you do not intend to use remote access. The devices are furnished with a default IP address and would go to an undefined state if they are connected to the network.
PAGE 5
Product documentation Topic/Title Document ID [1] TX Open Modbus engineering CM110571 [2] TX Open M-bus engineering CM110572 [3] TX Open USS (SED2, G120P) engineering CM110573 [4] TX Open Grundfos engineering CM110574 [5] TX Open G120P engineering CM110576 [6] TX Open Tool online help — [7] TX-I/O modules, datasheets CM1N817... [8] TX-I/O engineering and installation guide CM110562 Related documents such as environmental declarations, CE declarations, etc.
PAGE 6
Disposal The device is considered an electronic device for disposal in terms of the European Directive and may not be disposed of as domestic waste. ● Use only designated channels for disposing the devices. ● Comply with all local and currently applicable laws and regulations. Technical data Power supply Operating voltage DC 24 V Power on the island bus. No separate power required. Power consumption 100 mA, 2.
PAGE 7
Standards, directives and approvals Product standards EN 60730-1 Automatic electrical controls for household and similar use Product family standard EN 50491 General requirements for Home and Building Electronic Systems (HBES) and Building Automation and Control Systems (BACS) Electromagnetic compatibility (EMC) For residential, commercial, and industrial environments EU conformity (CE) see CM2T8185xx RCM conformity see CM2T8185en_C1 UL approbation (US) UL916, http://database.ul.
PAGE 8
Dimensions Dimensions in mm Published by Siemens Switzerland Ltd Building Technologies Division International Headquarters Theilerstrasse 1a CH-6300 Zug Tel. +41 58-724 24 24 www.siemens.com/buildingtechnologies Document ID CM2N8187en_05 8 /8 Date 2019-01-14 TXI2.OPEN, TXI2-S.