User Manual

ManualsBrandsSiemens ManualsBuilding automationBACnet Router PXG3.M and PXG3.L Engineering and configuration

CM1N9294en_05

2016

-06-15

Building Technologies

294

Desigo

™ PX

Web interface

BACnet/IP

PXG3.W100

Local or remote operation of one or multiple PX automation station(s) via

Desigo Touch Panels (TP) and standard web browser

• Ethernet connection

• Central user interface for simultaneous access from various operator units

• Central management of plant graphics and other user views

• Offline engineering using Xworks Plus

• Upload/download configuration data via LAN, or Internet

• LED indication for Ethernet link and activity

• 2-port Ethernet switch for low-cost cabling (10/100baseT)

• Plug-in screw terminal block for supply

• Operating voltage AC 24 V or DC 24 V

• on DIN rail mounting

Summary of content (8 pages)

PAGE 1
s Desigo™ PX Web interface BACnet/IP 9 294 PXG3.
PAGE 2
Use Topology The PXG3.W100 web interface is the central access point for operating the automation level. The central access point allows simultaneous operation of different operator units. It also supports integration of Desigo touch panels PXM40 / PXM50 as well as access from a standard web browser. The following operating and monitoring functions are available: • • • • • • • • • • • Login and logout. Simple plant overview without user login. Limit view to plant level. Graphical plant operation.
PAGE 3
Product documentation Document type Data sheet Touch Panel PXM40, Data sheet Touch Panel PXM50 Operating instructions Desigo Touch and Web Installation and commissioning instructions Desigo Touch and Web Engineering: Online help for Desigo Xworks Plus Document no. CM1N9292 CM1N9293 CM111028 CM111029 CM111006en.chm Functions Communication The web interface has a 2-port Ethernet switch for low-cost cabling on a line topology. A USB port is available for service and commissioning.
PAGE 4
Mechanical design 3 2 1 Plastic housing 2 Plug-in terminal block (operating voltage) 3 2-port Ethernet switch (with 2 LEDs per port for display purposes) 4 LED display for device and system status 5 Tool interface (USB) 6 Service button for identification on network 7 Slider for mounting on DIN rail 2 4 1 5 9294z01 6 7 Notes Engineering Cable length, topology, etc.: See installation manual Desigo TRA, CM111043.
PAGE 5
Technical data Power supply Power consumption Hardware information Response to power / communication failure Operating voltage (24V≃, ⊥, ) Frequency Half-wave load ( = Technical ground) At AC 24 V At DC 24 V Internal fusing External supply line protection (EU) AC 24 V ±20% (SELV) AC 24 V class 2 (US) 48...63 Hz Symmetric DC 24 V ± 20 % or Max. 9 VA Max. 4 W With PTC Fuse slow max. 10 A or Circuit breaker max.
PAGE 6
Ambient conditions Operation Climatic conditions Temperature Humidity Mechanical conditions As per IEC 60721-3-3 Class 3K5 –5 ... 50 °C 5 … 95 % r.h. Class 3M2 As per IEC 60721-3-2 Class 2K3 -25...70 °C 5 … 95 % r.h.
PAGE 7
Dimensions All dimensions in mm 7/8 Siemens Building Technologies Web interface BACnet/IP PXG3.
PAGE 8
Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 www.siemens.com/buildingtechnologies © Siemens Switzerland Ltd 2013 Delivery and technical specifications subject to change 8/8 Siemens Building Technologies Web interface BACnet/IP PXG3.