Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000- 4000co- 17.04.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1- 4000COU.FM 06.05.02 Brief overview of the handset Brief overview of the handset The display is protected by a plastic film. Remove the plastic film.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1- 4000COU.FM 06.05.02 Brief overview of the handset Important menus © D Text Message* New Entry Select Services Anne Add.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1- 4000COU.FM 06.05.02 Safety precautions Safety precautions $ ! Only use the power supply unit supplied as indicated on the underside of the device. Only insert approved rechargeable batteries of the same type. Never use ordinary (non-rechargeable) batteries as they may pose a health hazard or cause injury.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1- 4000coivz.fm 08.03.02 Contents Contents Brief overview of the handset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Interaction between control key and display keys. . . . . . . . . . . . . . . . . . . . . . . . . .2 Important menus . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Display symbols . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4000CO.FM Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 06.05.02 Preparing the handset Press Keys: Preparing the handset Delivery package Gigaset 4000 Micro handset, one battery, charging unit, belt clip, operating instructions. Inserting the battery et as Gig et as 00 40 icro Gig m 00 40 icro m The default display language on your handset is Italian. To set the desired language, see page 8. Registering the handset Step 1: © Open the menu.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Preparing the handset Press Keys: 4010/4015 Hold down the key on the underside of the base station. 3010/3015 Hold down the paging-keyy on the base station until you hear signal tones. 3020/25 3030/35 4030/35 Select settings, system settings and register handset in the menu at the base station telephone and confirm with OK. 3070/75 4070/75 Press the LED – it will flash during registration.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Preparing the handset Press Keys: Setting the date and time You need to set the date and time so that the time that messages and calls are received is shown correctly. © Open the menu. D åååååååååååååååååååååååååååååååå [ Select and confirm. Calendar/Clock D åååååååååååååååååååååååååååååååå [ Select and confirm. Date/Time The current setting is shown. Enter the date Enter the day/month/year. In this case 20.05.2001. e. g.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Making calls Press Keys: Making calls Making an external call o Enter the telephone number. If you make a mistake use the X key to correct individual digits. c a Press the talk key. Press the end call key to end the call. ● ● ● You can also press the talk key c first and then enter the telephone number - each digit will be dialled immediately. You can cancel the dialling operation by pressing the end call key a.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Making calls Press Keys: Open caller list/message list* A message appears in the display and the status LED flashes to indicate that there are new calls/messages. ? Press Handsfree talking Handsfree talking when dialling o Dial the telephone number. u Press the handsfree key. When handsfree talking is activated, the handsfree key u and the status LED are lit. Handsfree talking during a call u Activate handsfree talking.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Automatic redial Press Keys: Automatic redial Manual redial You have access to the last five telephone numbers dialled. z D Display and select the telephone number. c Press the talk key. Automatic redial This function is not available in all countries. The handsfree key flashes and open listening is activated. The function is deactivated after ten unsuccessful call attempts or if a call was made in the meantime.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Directory and network access list Press Keys: Directory and network access list With the D directory you can store up to 200 telephone numbers and then dial them at the push of a button. You can save the prefixes (Call-by-Call)* of telephone companies in the network access list C. The directory and network access list are used in exactly the same way. Storing an entry D / C Open the directory/network access list.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Directory and network access list Press Keys: Dialling with the network access list (Call-by-Call) C Open the network access list. D© Select call-by-call number and open the menu. [ Select the menu item and confirm. Display Number åååååååååååååååååååååååååååååååå o Enter the telephone number of the person you want to call. or DD [ Select the telephone number in directory and confirm. c Press the talk key.
4000CO.FM Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 06.05.02 Directory and network access list Press Keys: Character map Press the relevant key repeatedly or hold down: 1x ] Ÿa ^ d ¡ g ¢j £ m ¤ p ¥t ¬ w →A « a→ Þ.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Directory and network access list Press Keys: Displaying, changing or deleting an entry D/C Open the directory/network access list. D Select the entry you want. View Change View all the information for the entry. Open the input field and make the necessary changes. o Change the number if necessary. D o Go to the name field and change the name. For notes on entering letters and characters s. page 14.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Directory and network access list Press Keys: Copying the directory/network access list You can copy the entire directory/network access list to another Micro/Comfort handset. See “Copying an entry to another handset” . Transmission is interrupted: ● ● if the memory of the receiving handset is full. if you receive a call. Copying of an entry is terminated.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Settings Press Keys: Settings Setting the alarm clock If activated, the alarm clock (¼ icon) on your handset will ring every day at the time entered. With the handset idle: © Open the menu. D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm. Calendar/Clock D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm. Alarm Clock The current setting is displayed. FG Select On .
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Settings Press Keys: Setting an appointment Your handset is able to remind you of one appointment. If you have set an appointment, this is indicated by the ¼ icon in the display. With the handset idle. © Open the menu. D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm. Calendar/Clock [ Select the menu item and confirm. Set Appoints.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Settings Press Keys: Missed appointments and anniversaries An appointment and anniversaries that have been signalled on the handset but not been accepted are saved in a list. A new missed appointment/anniversary is indicated by Appt.. Press the right display key to display the list Events list. Then select Missed Appoint. ¼ [. If you want to view your appointment again, proceed as follows: © Open the menu.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Settings Press Keys: Time control for ringer volume You can set a different ringer volume for a particular time of day. © Open the menu. D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm. Sound Settings D åååååååååååååååååååååååååååååååå [ You will hear the current ringer volume and its level Ringer Settings will be displayed. Time C. Press. F G Activate/deactivate time control.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Settings Press Keys: Activating/deactivating the vibration alarm If you do not wish to be disturbed by the ringing tone you can activate the handset’s vibration alarm instead. This can also be activated in addition to the ringing tone (in noisy surroundings, for instance). © Open the menu. D åååååååååååååååååååååååååååååååå [ Select and confirm. Sound Settings D åååååååååååååååååååååååååååååååå [ Select and confirm.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Room monitoring (babyphone) Press Keys: Resetting to the factory defaults The directory, the network access list and the caller list are not deleted when you reset the handset. Registration at the base station is not affected. © Open the menu. D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm. H/Set Settings D åååååååååååååååååååååååååååååååå [ Select the menu item and confirm.
4000CO.FM Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 06.05.02 Room monitoring (babyphone) Press Keys: Setting the room monitor © Open the menu. D åååååååååååååååååååååååååååååååå [ Add. Features D åååååååååååååååååååååååååååååååå [ Room Monitor. FG D Change Select the menu item and confirm. Select the menu item and confirm. Select On or Off . Scroll forward one line. Open the entry field for the telephone number. Delete an existing external number with X.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Walk and Talk mode Press Keys: Walk and Talk mode Requirements: The handsets must have the same base settings (e.g. best base station) or they must not be registered at any base station. (Walk and Talk mode reduces the handset's talk time considerably). In Walk and Talk mode, handsets are not available for incoming calls. Activating Walk and Talk mode on the handset © Open the menu.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000- 4000CO.FM 06.05.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Appendix Recommended batteries: Nickel-Metal-Hydride (NiMH), 500 mAh. Order No. V30145-K1310-X125 or Order No. V30145-K1310-X229 The handset’s operating times/charging time: Capacity (mAh) Standby time (hours) Talk time (hours) Charging time (hours) 500 up to 300 approx. 16 approx. 5.5 Battery charging capacity falls after a number of years.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000- 4000CO.FM 06.05.0 Appendix ● The guarantee provides for devices or components that, despite proper care and use, have demonstrably developed defects due to faulty workmanship and/or faulty materials to be replaced or repaired at our discretion free of charge. The guarantee does not cover normal wear and tear.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Appendix ● Changes to this guarantee require prior approval by Siemens in writing. Guarantee period ● ● ● ● ● The guarantee applies in countries in the EU from 1 January 2002 for a period of 24 months. In all other countries the guarantee period shall be the relevant minimum statutory guarantee period, but no longer than 24 months. The guarantee period starts on the day of purchase by the customer.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000- 4000CO.FM 06.05.0 Appendix Customer Care Service You can get assistance easily when you have technical questions or questions about how to use your device by using our online support service on the Internet at: www.my-siemens.com/customercare If the device needs to be repaired, please contact one of our service centers: Service telephone number see back cover.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000-B027-1-6419 4000CO.FM 06.05.02 Appendix Display languages When registering the handset with the Gigaset 4010i base station, the languages marked with an * can be set: Einstellungen H/Set Settings Réglages comb.
Gigaset 4000 Micro, De-It-Fr-Sp-GB, A31008-G4000- 4000CO.FM 04.07.02 Appendix We, Siemens AG, declare, that the above mentioned product is manufactured according to our Full Quality Assurance System certified by CETECOM ICT Services GmbH with the registration number „Q810820M“ in compliance with ANNEX V of the R&TTE-Directive 99/05/EC. The presumption of conformity with the essential requirements regarding Council Directive 99/05/EC is ensured.
Giga 4000 Micro, Inland, A31008-G4000-B027-1-6419 A31008-G4000-B027-1-6419 4000MicroCOVER- Issued by Information and Communication mobile Haidenauplatz 1 D-81667 München © Siemens AG 2002 All rights reserved. Subject to availability. Right of modification reserved. Printed in Germany (05/2002). Siemens AG http://www.my-siemens.com Best.-Nr.: A31008-G4000-B027-1-6419 A3 1 0 0 8 - G4 0 0 0 - B0 2 7 - 1 - 6 4 1 9 07.05.
