User Manual

167 / 184
Siemens Desigo Insight, Operating the management station, V6.0 SP2 CM110588en02_10
Building Technologies Eco Viewer 2017-03-31
15.4 Edit KPS and KPI
All KPIs must be assigned upper and lower limits in order to make a meaningful
evaluation of your plant. A message is sent out for the KPI if this limit is exceeded.
If multiple KPIs are available for a function, another message is sent to the KPS
object based on the weighting of the faulty KPIs. KPI weighting can only be edited
on automation stations with the appropriate tool.
You can influence KPS weighting to propagate states in the Eco browser. We rec-
ommend weighting since not all objects require the same amount of energy. With-
out weighting, the smallest breach triggers propagation to the top. This Eco brows-
er weighting is only relevant to the display in Desigo Insight.
You can define weighting for each KPS on the Eco browser. The default setting for
each object is 1.
1. In the Eco browser, select the desired object hierarchy . All underlying
objects are displayed in the object list.
2. In the Weighting column, select the appropriate field.
3. Enter the weighting. In the Edit column, the edit symbol only appears
when you edit the next object.
General
KPS weighting