User Manual

System overview
3.4 Mounting / removal
3UG4 / 3RR2 monitoring relays
30 Manual, 02/2013, NEB927043002000/RS-AA/002
Separately mounted
Note
The accessories required for separate mounting are described in Chapter "Terminal support
for stand-alone assembly (Page 312)."
3.4.2 Mounting the 3UG4 monitoring relay
Mounting position
It can be mounted in any position.
Screw mounting
The illustration below shows how to screw-mount the 3UG4 monitoring relay.
Table 3- 11 Mounting the monitoring relay (screw mounting)
Step Operating instruction Image
1 Slide the push-in lugs into the openings on
the monitoring relay at the top and bottom,
and use the screwdriver to secure the
device by screwing suitable screws through
the holes in the push-in lugs.
53