Datasheet

ManualsBrandsSiemens ManualsCurrent Monitoring RelaysCurrent Monitoring Relay 240V 1CO

Product data sheet 3UG4621-1AW30

DIGITAL MONITORING RELAY CURRENT MONITORING,

22.5MM FROM 2 TO 500MA AC/DC OVERSHOOT A.

UNDERSHOOT AC/DC 24 TO 240V DC AND AC 50 TO 60

HZ ON AND SPIKE DELAY 0.1 TO 20S HYSTERESIS 0.1

TO 250MA 1 CO CONTACT W. OR W/O ERROR MEMORY

SCREW CONNECTION REPLACEMENT PRODUCT FOR

3UG3521-1AL20,

3UG3521-1AG20 AND 3UG3521-1AC48-0AA1

Product function Current monitoring relay

Measuring circuit:

Number of poles / for main current circuit 1

Type of current / for monitoring AC/DC

Measurable current A 0.0030 … 0.6

• for AC mA 3 … 600

Measurable line frequency Hz 40 … 500

Adjustable response current

• 1 A 0.0030 … 0.5

• 2 A 0.0030 … 0.5

Adjustable response delay time

• when starting s 0.1 … 20

• with lower or upper limit violation s 0.1 … 20

Adjustable switching hysteresis for measured current value mA 0.1 … 250

Stored energy time / at mains power cut / minimum ms 10

Operating voltage

• rated value V 24 … 240

Response time / maximum ms 450

Relative metering precision % 5

Precision of digital display +/-1 digit

3UG4621-1AW30

Page 1/ 06/04/2014

subject to modifications

Summary of content (6 pages)

PAGE 1
Product data sheet 3UG4621-1AW30 DIGITAL MONITORING RELAY CURRENT MONITORING, 22.5MM FROM 2 TO 500MA AC/DC OVERSHOOT A. UNDERSHOOT AC/DC 24 TO 240V DC AND AC 50 TO 60 HZ ON AND SPIKE DELAY 0.1 TO 20S HYSTERESIS 0.1 TO 250MA 1 CO CONTACT W.
PAGE 2
Relative temperature-related measurement deviation % Temperature drift per °C %/°C Relative repeat accuracy % 5 0.
PAGE 3
Insulation voltage / for overvoltage category III according to IEC 60664 / with degree of pollution 3 / rated value V 690 • between control and auxiliary circuit V 300 • between auxiliary circuit and auxiliary circuit V 300 Maximum permissible voltage for safe disconnection Degree of pollution 3 Ambient temperature • during operating °C -25 … +60 • during storage °C -40 … +85 • during transport °C -40 … +85 Galvanic isolation • between entrance and outlet Yes • between the outputs Ye
PAGE 4
• for auxiliary and control current circuit screw-type terminals • for main current circuit screw-type terminals Product function • removable terminal for auxiliary and control circuit Yes • removable terminal for main circuit Yes Type of the connectable conductor cross-sections • solid 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²) • finely stranded • with wire end processing 1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.5 mm²) • for AWG conductors • solid 2x (20 ... 14) • stranded 2x (20 ...
PAGE 5
General Product Approval EMC Test Certificates Special Test Certificate Shipping Approval Type Test Certificates/Test Report other Declaration of Conformity other Further information: Information- and Downloadcenter (Catalogs, Brochures,…) http://www.siemens.com/industrial-controls/catalogs Industry Mall (Online ordering system) http://www.siemens.com/industrial-controls/mall Cax online generator: http://www.siemens.com/cax Service&Support (Manuals, Certificates, Characteristics, FAQs,...