Data Sheet

ManualsBrandsSIEMENS ManualsDrive EngineeringSafety switchgear 3TK2810-1KA41

Data sheet 3TK2810-1KA41

SIRIUS safety relay Safety-oriented Speed monitoring 110-240 V

AC/DC, 45 mm overall width Screw terminal EC instantaneous: 2 NO

EC delayed: 0 SC: 2 electrical Auto-start/manual start Basic device

Maximum achievable PL according to EN 13849-1: e Maximum

achievable SIL according to IEC 61508: 3

General technical data

Product brand name SIRIUS

Product designation Speed monitor

Design of the product standstill and speed monitoring

Protection class IP of the enclosure IP20

Protection class IP of the terminal IP20

Protection against electrical shock finger-safe

Insulation voltage rated value 300V

Ambient temperature

● during storage

-20...+70°C

● during operation

0...60°C

Air pressure acc. to SN 31205 90...106kPa

Relative humidity during operation 10...95%

Installation altitude at height above sea level

maximum

2000m

Vibration resistance acc. to IEC 60068-2-6 10 ... 55 Hz: 0.35 mm

Shock resistance 8g / 10 ms

Surge voltage resistance rated value 4000V

EMC emitted interference EN 60947-5-1

3TK2810-1KA41 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 3TK2810-1KA41 SIRIUS safety relay Safety-oriented Speed monitoring 110-240 V AC/DC, 45 mm overall width Screw terminal EC instantaneous: 2 NO EC delayed: 0 SC: 2 electrical Auto-start/manual start Basic device Maximum achievable PL according to EN 13849-1: e Maximum achievable SIL according to IEC 61508: 3 General technical data Product brand name SIRIUS Product designation Speed monitor Design of the product standstill and speed monitoring Protection class IP of the enclosure IP20 Prot
PAGE 2
Installation environment regarding EMC This product is suitable for Class A environments only. It can cause undesired radio-frequency interference in residential environments. If this is the case, the user must take appropriate measures. Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 KT Reference code acc.
PAGE 3
— delayed switching 0 — instantaneous contact 0 ● for signaling function — delayed switching 1 — instantaneous contact 1 Stop category acc. to DIN EN 60204-1 0 General technical data Design of input ● cascading input/functional switching No ● feedback input Yes ● Start input Yes Type of electrical connection Plug-in socket Yes Switching capacity current ● of semiconductor outputs — for signaling function at DC-13 at 24 V 0.
PAGE 4
● at 50 Hz 110 ... 240 V ● at 60 Hz 110 ... 240 V Operating range factor control supply voltage rated value of magnet coil ● at AC — at 50 Hz 0.8 ... 1.1 — at 60 Hz 0.8 ... 1.1 ● at DC 0.8 ... 1.1 Installation/ mounting/ dimensions Mounting position any Mounting type screw and snap-on mounting Width 45 mm Height 105.9 mm Depth 124.3 mm Connections/Terminals Type of electrical connection screw-type terminals Type of connectable conductor cross-sections ● solid 0.5 ...
PAGE 5
Suitability for use ● Monitoring of floating sensors Yes ● Monitoring of non-floating sensors No ● safety switch Yes ● position switch monitoring Yes ● EMERGENCY-OFF circuit monitoring No ● valve monitoring No ● tactile sensor monitoring No ● magnetically operated switch monitoring No ● safety-related circuits Yes Certificates/approvals Certificate of suitability TÜV / IEC 61508 ● TÜV (German technical inspectorate) certificate Yes ● UL approval Yes ● BG BIA certificate No General
PAGE 7
A1 -F T4 ST MAG 13 23 T1 EA1 P1 1 GND B A U 8 E1 E2 A2 last modified: 3TK2810-1KA41 Page 7/7 T3 RF1 RF2 15 25 14 24 T2 EA2 P2 09/13/2019 09/13/2019 Subject to change without notice © Copyright Siemens