User Manual

3SU14 modules
7.1 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
142 System Manual, 02/2015, A5E03457306020A/RS-AB/002
7.1.8
AS-Interface modules for base mounting
With AS-Interface modules, distributed SIRIUS ACT pushbuttons and indicator lights can be
quickly connected to the AS-Interface communication system. The AS-Interface modules for
base mounting are installed in 3SU18 enclosures.
AS-Interface modules, spring-loaded terminals
3SU1400-2E (http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10251009)
Slave type
Number of digital inputs
Number of
digital outputs
Article number
Standard inputs Fail-safe
inputs
4 DI / 4 DQ 4 — 4 3SU1400-2EK10-
6AA0
4 DI / 3 DQ AB 4 — 3 3SU1400-2EJ10-
6AA0
2F-DI — 2 — 3SU1400-2EA10-
6AA0
2F-DI/1LED — 2 1
For controlling
the LEDs
3SU1401-2EE20-
6AA0
The electronic modules for ID key-operated switches are designed for use with the ID key-
operated switch. The electronic modules for ID key-operated switches can be installed in a
3SU18.1-1AA00-1AA1 enclosure for one command point, or in a front plate using 3-slot
holders. The 3SU1400-1GD10-1AA0 electronics modules for ID key-operated switches can
be parameterized via IO-Link.
For further information refer to Chapters "ID key-operated switches (Page 78)", "ID keys
(Page 260)" and "Technical data (Page 263)".
You can find information on using the electronic modules for ID key-operated switches for
IO-Link in Chapter "IO-Link (Page 205)".
Article numbers
3SU1400-1G (http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10221530)
Power supply via IO-
Link master
IO-Link protocol
supported
IO-Link transfer
rate
Article number
--- No --- 3SU1400-1GC10-
1AA0
Yes Yes COM2
(38.4 kBaud)
3SU1400-1GD10-
1AA0