Information

13/97
Siemens IC 10 · 2018
SIRIUS ACT Pushbuttons and Indicator Lights
Enclosures
General data
13
■ Overview
Design
Enclosures with standard fittings
Enclosed SIRIUS ACT pushbuttons and indicator lights are used
as hand-operated control devices for separately allocated con-
trol units and cabinets. The devices are suitable for use in any
climate and all have IP66, IP67, IP69 (IP69K) degree of protec-
tion, including those with cable glands.
Standards
IEC/EN 60947-5-1
Versions
The enclosed pushbuttons and indicator lights are available
with conventional controls as well as for connection to
AS-Interface. The following versions are available:
• Empty enclosures with between 1 and 6 command points (the
installed components must be ordered separately; modules
for floor mounting or 1-pole contact and LED modules
can be used)
• Enclosures with standard fittings with 1 to 3 command points,
e.g. EMERGENCY STOP enclosure with EMERGENCY STOP
mushroom pushbutton
• Enclosures with customized fittings with 1 to 6 command
points
• Special enclosure for 4-position selector switches,
coordinate switches, ID key-operated switches and sensor
switches
Color of the enclosures
Top :
• Gray, RAL 7035
• Yellow, RAL 1004 for EMERGENCY STOP
Base:
• Black, RAL 9005
Enclosures with standard fittings
Pushbuttons and indicator lights in the enclosure
Customized enclosures
The fittings and labeling of the command point can be chosen
using the Configurator on the Internet. The prices depend on the
equipment selected, see
www.siemens.com/sirius-act/configurator.
■ Application
The enclosures are climate-proof (KTW 24) according to
EN ISO 6270-2 and suitable for stationary use, and for use in
marine applications.
3
2
1
4
5
7
6
8
3
7
8
5
4
6
1
2
Contact modules for base
mounting
LED module for base
mounting
Pushbutton
Indicator light
Labeling plates
Enclosure top
Holder
Enclosure lower part
IC01_00480
© Siemens AG 2017