User Manual

3SU10 device range

4.3 Mounting

SIRIUS ACT 3SU1 pushbuttons and signaling devices

System Manual, 02/2015, A5E03457306020A/RS-AB/002

4.3.5

Installation sequence ID key-operated switch

Procedure

①

Insert the ID key

-operated switch from the front into the opening of the front plate.

②

Place the holder from behind onto the ID key

-operated switch.

③

Tighten the screw on the holder (tightening torque 1.0

to 1.2 Nm).

④

Snap the electronic module onto the back of the holder.

Fit the narrow snap hook into the associated contours on the holder.

⑤

Engage the broad snap hook into the associated contour on the holder.

Ensure secure latching