User Manual

IO-Link
10.2 Design of a command point with ID key-operated switch
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 02/2015, A5E03457306020A/RS-AB/002
225
"Data storage inhibition" parameter
"Data Storage Lock" parameter
With the "Data Storage Lock" parameter, you define whether or not the mechanism for data
storage is disabled.
The table below shows the parameter values.
Table 10- 4 "Data Storage Lock" parameter
Value
Description
Default setting
0
Data Storage Lock: enabled
Enabled
1 Data Storage Lock: disabled —
10.2.4
Process image
Process image input (PII)
The process image input contains the most important status information of the electronic
modules for the ID key-operated switch for IO-Link.
Table 10- 5 PII - status information
DI (2 bytes)
PII
DI0.0
1: Ready
DI0.1 1: Group error
DI0.2
Reserved
DI0.3
Reserved
DI0.4
Reserved
DI0.5
Reserved
DI0.6
Reserved
DI0.7
Reserved
DI1.0
1: ID key detected
DI1.1
1: Authorization level
DI1.2
1: Switch position