Information

13/84
Siemens IC 10 · 2018
SIRIUS ACT Pushbuttons and Indicator Lights
Actuators and Indicators, Customized Designs
Laser inscriptions
13
■ Options
Inscription of actuating and signaling elements
Actuating and signaling elements of plastic as well as metal can
be optionally inscribed with a laser.
Example of laser inscription
The actuators of the pushbuttons, illuminated pushbuttons, twin
pushbuttons, mushroom pushbuttons, illuminated mushroom
pushbuttons, EMERGENCY STOP mushroom pushbuttons
(without lock), the lenses of the indicator lights, and the acoustic
signaling devices can all be inscribed.
Version
Text inscriptions have centered alignment and a font height of
4 mm as standard.
The typeface used is Arial. Other letter heights and typefaces
are possible, but must be specified when ordering.
The maximum possible number of characters per line is:
• 10 characters for one line of text
• 8 characters for 2 lines of text
• 6 characters for 3 lines of text, but 10 characters in the middle
line
Note:
Selected pushbuttons and twin pushbuttons can be supplied as
standard with inscribed letters or symbols.
Selector switches, key-operated switches and toggle switches
can be inscribed on the front ring only if they are made of plastic
(only one text line and the supplement Y19).
Assignment of the positions on the actuator
Ordering notes
To order, the inscribed actuating and signaling elements can be
selected via the SIRIUS ACT Configurator. An electronic order
form is then generated.
For configurator, see
• www.siemens.com/sirius-act/configurator
• Electronic Catalog CA 01 on DVD or
• Industry Mall: www.siemens.com/industrymall
When ordering, add –Z and an order code to the article number
of the actuator or the indicator light:
• Y10: Text line in upper/lower case, all lines begin with upper
case letters (e.g. line 1: Text/line 2: Text)
• Y11: Text in upper case (e.g. LIFT)
• Y12: Text in lower case (e.g. lift/off/lower)
• Y15: Text in upper/lower case, all words begin with upper
case letters (e.g. On/Off)
• Y13: Symbol with number according to ISO 7000 or
IEC 60417
• Y19: Inscription of choice, text or symbol, can only be ordered
via SIRIUS ACT Configurator with a Configuration Identifica-
tion Number (CIN)
When ordering, specify the required inscription in plain text with-
out spaces, in addition to the article number and order code. In
the case of special inscriptions with words in languages other
than German, give the exact spelling and specify the language.
In the case of symbols with number, quote the corresponding
standard
(see ordering example 1).
In the case of multi-line inscriptions, the text must be assigned
to the respective line, e.g. Z1=Lift, Z2=Lower.
Symbols can also be ordered with numbers according to
ISO 7000 or IEC 60417 (see ordering examples 2 and 3).
The SIRIUS ACT Configurator must be used to select special
inscriptions and symbols (order code Y19). In this case a CIN
(Configuration Identification Number) is generated for place-
ment of future orders. It is then possible to place an order directly
using the CIN and the SIRIUS ACT Configurator (Mall shopping
cart) or via the standard ordering channels.
Ordering example 1
A round pushbutton with the inscription Reset is required:
3SU1030–0AB20–0AA0-Z
Y10
Z1=Reset
Ordering example 2
A pushbutton inscribed with symbol No. 5389 according to
IEC 60417 is required:
3SU1030–0AB20–0AA0-Z
Y13
Z=5389 IEC
Ordering example 3
A selector switch with 2 switch positions and multi-line
inscription on the front ring is required:
3SU1002-2BF10-0AA0-Z
Z8=0
Z2=I
Z1
Z2
Z3
Z4
Z5
Z6
Z7
Z8
IC01_00522
© Siemens AG 2017