User Manual

3SU10 device range
4.2 Overview
SIRIUS ACT 3SU1 pushbuttons and signaling devices
System Manual, 02/2015, A5E03457306020A/RS-AB/002
45
Overview of holders with contact module
These variants are preassembled. You need only snap them onto the actuator, tighten the
fastening screws and connect the cables.
You can find information about the contact modules used in Chapter "Contact modules for
front plate mounting (Page 135)".
Holder position 1
Holder position 2
Holder position 3
Article number
Plastic (http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10221521)
3SU1400-1AA10-1BA0 — — 3SU1500-1AA10-1BA0
3SU1400-1AA10-1CA0
—
—
3SU1500-1AA10-1CA0
3SU1400-1AA10-1BA0 — 3SU1400-1AA10-1BA0 3SU1500-1AA10-1NA0
Metal (http://mall.industry.siemens.com/mall/en/en/Catalog/Products/10221521)
3SU1400-1AA10-1BA0
—
—
3SU1550-1AA10-1BA0
3SU1400-1AA10-1CA0
—
—
3SU1550-1AA10-1CA0
3SU1400-1AA10-1BA0
—
3SU1400-1AA10-1BA0
3SU1550-1AA10-1NA0
3SU1400
-1AA10-1BA0: Contact module 1NO normally open contact
3SU1400
-1AA10-1CA0: Contact module 1NC normally closed contact
3SU1400-1AA10-1FA0: Contact module 1NO1NC normally open contact/normally closed contact