User Manual

Functions

5.6 Functions of the outputs

SIRIUS 3RW30 / 3RW40

Manual, 10/2010, 535199502000 DS 03

5.6.3 3RW40: Group fault output at terminal 95 / 96 / 98 OVERLOAD / FAILURE

If there is no rated control voltage or if a failure occurs, the potential-free FAILURE /

OVERLOAD output is switched.

For recommended circuits, refer to chapter Typical circuit diagrams (Page 175).

For a state diagram of the contacts in the vari

ous fault and operating states, refer to chapter

Diagnostics and fault signals (Page 48).