Data Sheet

Auxiliary circuit
Design of the auxiliary switch transverse
Number of NC contacts for auxiliary contacts 1
Number of NO contacts for auxiliary contacts 1
Number of CO contacts
● for auxiliary contacts
0
Operating current of auxiliary contacts at AC-15
● at 24 V
2A
● at 120 V
0.5A
● at 125 V
0.5A
● at 230 V
0.5A
Operating current of auxiliary contacts at DC-13
● at 24 V
1A
● at 60 V
0.15A
Protective and monitoring functions
Product function
● Ground fault detection
No
● Phase failure detection
Yes
Trip class CLASS 10
Design of the overload release thermal
Operational short-circuit current breaking capacity
(Ics) at AC
● at 240 V rated value
100kA
● at 400 V rated value
100kA
● at 500 V rated value
100kA
● at 690 V rated value
4kA
Maximum short-circuit current breaking capacity (Icu)
● at AC at 240 V rated value
100kA
● at AC at 400 V rated value
100kA
● at AC at 500 V rated value
100kA
● at AC at 690 V rated value
6kA
Response value current
● of instantaneous short-circuit trip unit
65A
UL/CSA ratings
Full-load current (FLA) for three-phase AC motor
● at 480 V rated value
5A
● at 600 V rated value
5A
Yielded mechanical performance [hp]
● for single-phase AC motor
— at 110/120 V rated value
0.167hp
— at 230 V rated value
0.5hp
3RV2011-1FA15-0BA0 Subject to change without notice
Page 3/
9
09/12/2019 © Copyright Siemens