Datasheet

• at 110 V A 1

• at 220 V A 0.3

Short-circuit:

Design of the fuse link

• for short-circuit protection of the auxiliary switch / required fuse gL/gG: 10 A

• for short-circuit protection of the main circuit

• with type of assignment 1 / required gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE: 35

• at type of coordination 2 / required gL/gG LV HRC 3NA, DIAZED 5SB, NEOZED 5SE:

20A

Installation/mounting/dimensions:

Built in orientation vertical

Type of mounting screw and snap-on mounting onto 35 mm standard

mounting rail according to DIN EN 50022

Type of fixing/fixation / series installation Yes

Width mm 45

Height mm 57.5

Depth mm 73

Distance, to be maintained, to the ranks assembly / sidewards mm 0

Distance, to be maintained, to earthed part / sidewards mm 6

Connections:

Design of the electrical connection

• for main current circuit screw-type terminals

• for auxiliary and control current circuit screw-type terminals

Type of the connectable conductor cross-section

• for main contacts

• solid 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²

• finely stranded

• with conductor end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)

• for AWG conductors / for main contacts 2x (20 ... 16), 2x (18 ... 14), 2x 12

• for auxiliary contacts

• solid 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²), 2x 4 mm²

• finely stranded

• with conductor end processing 2x (0.5 ... 1.5 mm²), 2x (0.75 ... 2.5 mm²)

• for AWG conductors / for auxiliary contacts 2x (20 ... 16), 2x (18 ... 14), 2x 12

Certificates/approvals:

3RT2016-1FB41

Page 4/ 03/30/2012

subject to modifications