Datasheet

● for short-circuit protection of the auxiliary switch
required
fuse gL/gG: 10 A
Installation/ mounting/ dimensions:
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
according to DIN EN 50022
● Side-by-side mounting
Yes
Height 60mm
Width 45mm
Depth 73mm
Required spacing
● for grounded parts
— at the side
6mm
Connections/ Terminals:
Type of electrical connection
● for main current circuit
Cage Clamp terminals
● for auxiliary and control current circuit
Cage Clamp terminals
Type of connectable conductor cross-sections
● for main contacts
— solid
2x (0.25 ... 2.5 mm²)
— single or multi-stranded
2x (0,25 ... 2,5 mm²)
— finely stranded with core end processing
2x (0.25 ... 1.5 mm²)
— finely stranded without core end
processing
2x (0.25 ... 2.5 mm²)
● at AWG conductors for main contacts
2x (24 ... 14)
Type of connectable conductor cross-sections
● for auxiliary contacts
— solid
2x (0.25 ... 2.5 mm²)
— finely stranded with core end processing
2x (0.25 ... 1.5 mm²)
— finely stranded without core end
processing
2x (0.25 ... 2.5 mm²)
● at AWG conductors for auxiliary contacts
2x (24 ... 14)
Certificates/approvals
3RT1015-2AP01 Changes preserved
Page 4/
6
23.02.2016 © Copyright Siemens AG