Datasheet

ManualsBrandsSiemens ManualsAutomationThermistor Motor Protection Relay 5A 250VAC 2CO SIRIUS

Data sheet 3RN2011-1BA30

Thermistor motor protection relay Standard evaluation unit 22.5 mm

enclosure screw terminal 2 change-over contacts US = 24 V AC/DC

Manul/Remote-Reset with ATEX approval 2 LEDs

(READY/TRIPPED) galvanic isolation Test/reset button Wire break

monitoring Short circuit monitoring

Product brand name SIRIUS

Product category SIRIUS 3RN2 thermistor motor protection

Product designation Thermistor motor protection relay

Design of the product Standard evaluation unit with ATEX approval, open-circuit and

short-circuit detection in the sensor circuit

Product type designation 3RN2

General technical data

Display version LED Yes

Power loss [W] for rated value of the current

● at AC in hot operating state

1.2W

● at DC in hot operating state

1.2W

Degree of pollution 3

Surge voltage resistance rated value 4kV

Protection class IP IP20

Shock resistance

● acc. to IEC 60068-2-27

11g / 15 ms

Mechanical service life (switching cycles)

● typical

10000000

Electrical endurance (switching cycles)

3RN2011-1BA30 Subject to change without notice

Page 1/

Summary of content (7 pages)

PAGE 1
Data sheet 3RN2011-1BA30 Thermistor motor protection relay Standard evaluation unit 22.
PAGE 2
● at AC-15 at 230 V typical 100 000 Thermal current of the switching element with contacts maximum 5A Reference code acc. to DIN 40719 extended according to IEC 204-2 acc. to IEC 750 K Reference code acc. to DIN EN 81346-2 K Reference code acc. to DIN EN 61346-2 K Control circuit/ Control Type of voltage of the control supply voltage AC/DC Control supply voltage at AC ● at 50 Hz rated value 24 ... 24 V ● at 60 Hz rated value 24 ... 24 V Control supply voltage at DC ● rated value 24 ...
PAGE 3
● at 125 V 0.2 A ● at 250 V 0.1 A Main circuit Operating frequency rated value 50 ... 60 Hz Outputs Ampacity of the output relay at AC-15 ● at 250 V at 50/60 Hz 3A Ampacity of the output relay at DC-13 ● at 24 V 1A ● at 125 V 0.2 A Continuous current of the DIAZED fuse link of the output relay 6A Electromagnetic compatibility Conducted interference ● due to burst acc. to IEC 61000-4-4 2 kV (power ports) / 1 kV (signal ports) ● due to conductor-earth surge acc.
PAGE 4
Product function ● removable terminal for auxiliary and control circuit Type of electrical connection ● for auxiliary and control current circuit Yes screw-type terminals screw-type terminals Type of connectable conductor cross-sections ● solid 1x (0.5 ... 4.0 mm²), 2x (0.5 ... 2.5 mm²) ● finely stranded with core end processing 1x (0.5 ... 4 mm²), 2x (0.5 ... 1.5 mm²) ● at AWG conductors solid 1x (20 ... 12), 2x (20 ... 14) Connectable conductor cross-section ● solid 0.5 ...
PAGE 5
0 mm — at the side Ambient conditions Installation altitude at height above sea level 2 000 m ● maximum Relative humidity 70 % ● during operation Explosion protection category for dust [Ex t] [Ex p] Explosion protection category for gas [Ex e] [Ex d] [Ex px] Certificates/ approvals General Product Approval Declaration of Conformity Miscellaneous EMC Test Certificates For use in hazardous locations Marine / Shipping Type Test Certificates/Test Report other Confirmation Further information In
PAGE 6
91.6 86.5 100 50 22.
PAGE 7
21 11 A1 A1 -K C C + + SIEMENS T > READY last modified: 3RN2011-1BA30 Page 7/7 NO 24 NC 22 NO 14 NC 12 - A2 A2 T2 T1 - TRIPPED 07/26/2019 08/02/2019 Subject to change without notice © Copyright Siemens