Datasheet

Thermal current of the switching element with
contacts maximum
5A
Reference code acc. to DIN 40719 extended
according to IEC 204-2 acc. to IEC 750
K
Reference code acc. to DIN EN 81346-2 K
Reference code acc. to DIN EN 61346-2 K
Control circuit/ Control
Type of voltage of the control supply voltage AC/DC
Control supply voltage at AC
● at 50 Hz rated value
24...24V
● at 60 Hz rated value
24...24V
Control supply voltage at DC
● rated value
24...24V
Operating range factor control supply voltage rated
value at DC
● initial value
0.85
● Full-scale value
1.1
Operating range factor control supply voltage rated
value at AC at 50 Hz
● initial value
0.85
● Full-scale value
1.1
Operating range factor control supply voltage rated
value at AC at 60 Hz
● initial value
0.85
● Full-scale value
1.1
Inrush current peak
● at 24 V
1.8A
Duration of inrush current peak
● at 24 V
2ms
Measuring circuit
Buffering time in the event of power failure minimum 40ms
Precision
Relative metering precision 9%
Auxiliary circuit
Material of switching contacts AgSnO2
Number of NC contacts for auxiliary contacts 1
Number of NO contacts for auxiliary contacts 1
Number of CO contacts
● for auxiliary contacts
0
Operating current of auxiliary contacts at DC-13
● at 24 V
1A
● at 125 V
0.2A
3RN2010-1CA30 Subject to change without notice
Page 2/
7
08/02/2019 © Copyright Siemens