Datasheet

OFF-delay time with safety-related request when
switched off via supply voltage maximum
120ms
ATEX
Hardware fault tolerance acc. to IEC 61508 relating
to ATEX
0
PFDavg with low demand rate acc. to IEC 61508
relating to ATEX
0.0005
PFHD with high demand rate acc. to EN 62061
relating to ATEX
0.000000051/h
Safety Integrity Level (SIL) acc. to IEC 61508 relating
to ATEX
SIL2
T1 value for proof test interval or service life acc. to
IEC 61508 relating to ATEX
3y
Main circuit:
Number of poles for main current circuit 3
Operating voltage Rated value maximum 500V
Relative symmetrical tolerance of the operating
voltage
10%
Operating frequency
● 1 Rated value
50Hz
● 2 Rated value
60Hz
Relative symmetrical tolerance of the operating
frequency
10%
Operating current at AC-53a at 400 V at ambient
temperature 40 °C Rated value
2A
Minimum load [% of IM] 20%
Active power loss typical 0.3W
Adjustable response value current of the current-
dependent overload release
0.4...2A
Operating power for three-phase motors at 400 V at
50 Hz
0.09...0.75kW
Operating frequency maximum 11/s
Control circuit/ Control:
Type of voltage of the control supply voltage DC
Control supply voltage 1
● at DC Rated value
24V
Operating range factor control supply voltage rated
value
● at DC
0.8...1.25
Control current
● at DC
— in standby mode
13mA
— during operation
57mA
3RM1102-2AA04 Changes preserved
Page 3/
6
22.10.2015 © Copyright Siemens AG