Datasheet

ManualsBrandsSIEMENS ManualsDrive EngineeringDirect motor starter SIRIUS 3RM1 Motor power at 400 V 0.75 kW 24 Vdc Nominal current 2.0 A

Data sheet 3RM1102-2AA04

MOTOR STARTER SIRIUS 3RM1 DIRECT STARTER SAFETY 500

V; 0,4 - 2,0 A; 24 V DC PUSH-IN TYPE CONNECTION SYSTEM

General technical data:

product brand name SIRIUS

Product designation Motor starter

Design of the product with electronic overload protection and safety-related shutdown

Trip class CLASS 10A

Protection class IP IP20

Suitability for operation Device connector 3ZY12 Yes

Product function Intrinsic device protection Yes

Type of the motor protection solid-state

Product function Adjustable current limitation Yes

Installation altitude at height above sea level

maximum

2000m

Ambient temperature

● during operation

-25...+60°C

● during transport

-40...+70°C

● during storage

-40...+70°C

Shock resistance 6g / 11 ms

Vibration resistance 1 ... 6 Hz, 15 mm; 20 m/s², 500 Hz

Surge voltage resistance Rated value 6kV

3RM1102-2AA04 Changes preserved

Page 1/

Summary of content (6 pages)

PAGE 1
Data sheet 3RM1102-2AA04 MOTOR STARTER SIRIUS 3RM1 DIRECT STARTER SAFETY 500 V; 0,4 - 2,0 A; 24 V DC PUSH-IN TYPE CONNECTION SYSTEM General technical data: product brand name SIRIUS Product designation Motor starter Design of the product with electronic overload protection and safety-related shutdown Trip class CLASS 10A Protection class IP IP20 Suitability for operation Device connector 3ZY12 Yes Product function Intrinsic device protection Yes Type of the motor protection solid-state Pro
PAGE 2
Insulation voltage Rated value 500 V Mechanical service life (switching cycles) typical 30 000 000 Conducted interference due to conductor-conductor surge acc. to IEC 61000-4-5 2 kV Conducted interference due to burst acc. to IEC 61000-4-4 3 kV / 5 kHz Conducted interference due to high-frequency radiation acc. to IEC 61000-4-6 10 V Electrostatic discharge acc. to IEC 61000-4-2 6 kV contact discharge / 8 kV air discharge Field-bound HF-interference emission acc.
PAGE 3
OFF-delay time with safety-related request when switched off via supply voltage maximum 120 ms ATEX Hardware fault tolerance acc. to IEC 61508 relating to ATEX 0 PFDavg with low demand rate acc. to IEC 61508 relating to ATEX 0.0005 PFHD with high demand rate acc. to EN 62061 relating to ATEX 0.00000005 1/h Safety Integrity Level (SIL) acc. to IEC 61508 relating to ATEX SIL2 T1 value for proof test interval or service life acc.
PAGE 4
— when switching on 150 mA Input voltage at digital input ● for signal <1> — at DC 15 ... 30 V ● with signal <0> — at DC 0 ... 5 V Input current at digital input ● for signal <1> — at DC 8 mA ● with signal <0> — at DC 1 mA Switch-on delay time 90 ... 120 ms OFF-delay time 40 ...
PAGE 5
1x (0.5 ... 1.5 mm²), 2x (0.5 ... 1.5 mm²) — without core end processing Type of connectable conductor cross-section for AWG conductors for auxiliary contacts 1x (20 ... 16), 2x (20 ... 16) UL ratings: Full-load current (FLA) for three-phase AC motor at 480 V Rated value 2A yielded mechanical performance [hp] ● for single-phase AC motor 0.125 hp — at 230 V Rated value ● for three-phase AC motor — at 200/208 V Rated value 0.333 hp — at 220/230 V Rated value 0.333 hp — at 460/480 V Rated value 0.
PAGE 6
141.6 136.5 100 50 22.5 -Q 1/L1 3/L2 5/L3 A1 IN1 95 Start Error SYS 3RM1 2/T1 last modified: 3RM1102-2AA04 Page 6/6 4/T2 6/T3 A2 M1 96 98 12.10.2015 22.10.