Data Sheet

Off-delay time 1ms; additionally max. one half-wave
Number of NC contacts / for auxiliary contacts 0
Number of NO contacts / for auxiliary contacts 0
Number of CO contacts / for auxiliary contacts 0
Installation/ mounting/ dimensions
Mounting type screw and snap-on mounting onto 35 mm standard mounting rail
● Side-by-side mounting
Yes
Height 100mm
Width 67.5mm
Depth 142mm; 156.0 mm up to product revision E05
Installation altitude / at height above sea level /
maximum
1000m
Connections/ Terminals
Type of electrical connection
● for main current circuit
Ring cable lug connection
● for auxiliary and control current circuit
ring cable connection
Type of connectable conductor cross-sections
● for main contacts / for JIS cable lug
JIS C 2805 R 2-5, 5,5-5, 8-5, 14-5
● for DIN cable lug / for main contacts
DIN 46234 -5-2,5, -5-6, -5-10, -5-16, -5-25
Type of connectable conductor cross-sections
● for auxiliary and control contacts
— solid
1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
— finely stranded / with core end processing
1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
— finely stranded / without core end
processing
1x (0.5 ... 2.5 mm²), 2x (0.5 ... 1.0 mm²)
● at AWG conductors / for auxiliary and control
contacts
1x (AWG 20 ... 12)
Tightening torque / for main contacts / with screw-
type terminals
2...2.5N·m
Tightening torque / for auxiliary and control contacts /
with screw-type terminals
0.5...0.6N·m
Tightening torque [lbf·in]
● for auxiliary and control contacts / with screw-
type terminals
4.5...5.3lbf·in
Design of the thread / of the connection screw
● for main contacts
M5
● of the auxiliary and control contacts
M3
Wire stripping length / of the cable
● for main contacts
10mm
● for auxiliary and control contacts
10mm
Ambient conditions
Ambient temperature
3RF2340-3AA02 Subject to change without notice
Page 3/
7
09/13/2019 © Copyright Siemens