User Manual

ManualsBrandsSiemens ManualsHearing Aid3

Table Of Contents

Word Bookmarks
- OLE_LINK1
- OLE_LINK2

CM1N9292en_03

2015

-12-23

Building Technologies

292

Desigo

™

10.1-inch touch panel

PXM40

For use with web interface PXG3.W100

• Compact design with low built-in depth, for mounting in control panel

doors

• High-resolution TFT display with 262 k colors

Resolution: 1280 x 800 pixels (wide screen)

• Capacitive touch screen

• Dimmable LED background lighting

• Intuitive operation and monitoring of multiple plants or Desigo PX

automation stations

• Optimized for local operation of the Desigo building automation and

control system

• LED to indicate alarms while the screen is off

• Connection via Ethernet RJ45

• Commissioning wizard

• Remote access via VNC to the touch panel

• No additional mounting materials required

Summary of content (8 pages)

PAGE 1
9 292 s Desigo™ 10.1-inch touch panel PXM40 For use with web interface PXG3.
PAGE 2
Use The Desigo PXM40 touch panel is designed for control panel mounting. It is used together with web interface PXG3.W100 and adapts the standard technology used for the web interface for local operation of the technical installations in the building. The touch panel allows for intuitive operation of multiple Desigo PX automation stations and allows for permanent monitoring of technical installations in a building. TCP/IP is used for communications.
PAGE 3
Auto logout Automatic logout can be set at intervals of 5…60 minutes. Keypad The keypad is designed for two different language groups: • Standard (for Latin-based languages and the so-called QWERTY layout), and • Russian (for Cyrillic languages; just Russian at this time). Keypad functionality The interaction with the keypad is roughly the same as commercially available products such as smart phone, tablets, etc. Alarm LED Pending alarms are indicated by an LED on the top right of the touch panel.
PAGE 4
Mechanical design The touch panels are intended for mounting in control panel doors or operating tablets. 10.1" touch panel Front 10.1" touch panel Rear Engineering Desigo Xworks Plus is used to engineer Desigo Touch and Web. The application contains an integrated online help for engineering (CM111006en.chm). Mounting notes Mounting types The touch panels can be integrated in the control panel door or in an operating table (e.g. remote control tablet).
PAGE 5
Commissioning notes Prerequisites A properly set up web interface (PXG3.W100) is prerequisite to commissioning the touch panel. Setting wizard A setting wizard is available for the network/server settings of the touch panel. For more information, please see the Installation and commissioning instructions Desigo Touch and Web CM111029en. Firmware download The firmware can be downloaded via micro USB interface.
PAGE 6
Protection data Protection class III as per EN 60950-1 (if installed correctly) Front: IP54 Rear: IP20 As per EN 60529 (if installed correctly) 2 as per EN 60950-1 Housing protection Degree of pollution Operation Transport Storage EN 60721-3-3 EN 60721-3-2 EN 60721-3-1 Class 3K5 Class 2K3 Class 1K3 0…+50 °C -25…+70 °C -20…+65 °C < 95% r.h. < 95% r.h. < 95% r.h. (non-condensing) Class 3M2 Class 2M2 Class 1M2 Min. 700 hPa, corresponds to a maximum of 3000 meters above sea level.
PAGE 7
Connections ① ② ① 24 V AC/DC ② LAN RJ45 ③ COM ③ ④ ⑤ ⑥ ④ Micro-USB-Device ⑤ USB-Host ⑥ Reset Dimensions 51.3 198 ) .1" 15.2 6. 25 10 4( 167.6 289 All dimensions in mm 15.2 46.3 5.0 258.6 9292M01 A cutout dimensioned as follows is required to mount the touch panel in the control panel door. 266 92 92M02a 174 Cutout for PXM40 Wall thickness: 1 mm to 4 mm 7/8 Siemens Building Technologies 10.
PAGE 8
Disposal The devices are considered electronics devices for disposal in terms of European Directive 2012/19/EU and may not be disposed of as domestic garbage. • Dispose of the devices through channels provided for this purpose. • Comply with all local and currently applicable laws and regulations. Published by: Siemens Switzerland Ltd. Building Technologies Division International Headquarters Gubelstrasse 22 6301 Zug Switzerland Tel. +41 41-724 24 24 www.siemens.