User Guide

Flowrite™ VF 599 Series
Technical Instructions
Document No. 155-185P25
VF 599-4
April 9, 2007
Three-Way Valves
1/2 to 2-inch Bronze Body
PRODUCT NO.
MODEL
LANDIS & STAEFA
ASSEMBLED IN
U.S.A.
Cv
VF0186R1
Siemens Building Technologies, Inc.
Description
The Flowrite VF 599 Series ANSI Class 250 three-way valves are designed to work
with either a pneumatic or electronic actuator with a 3/4-inch (20 mm) stroke.
Features
Direct coupled universal bonnet
Choice of bronze or stainless steel trim
ANSI Leakage Class IV (0.01% of Cv)
Cartridge type packing
Application
A typical application for the Flowrite three-way valve is the mixing of two different
temperatures of water supplies.
The valve can also be used for throttling or bypass coil control applications. A pump is
recommended on the coil circuit to improve the heat transfer characteristics of the coil
and for freeze protection.
Product Numbers
See Table 1.
Ordering a Valve
Plus Actuator
Assembly
To order a complete valve plus actuator assembly from the factory, combine the
actuator prefix code with the suffix of the valve assembly product number. See TB 249
Flowrite 599 Series Valve and Actuator Assembly Selection Technical Bulletin
(155-304P25) for selection procedure and ordering codes.
Valve assemblies can be ordered using the numbers in Table 1.

Summary of content (13 pages)