Data Sheet for Product
Powermite 599 MZ Series SSB Electronic Valve Actuator Technical Instructions
24 Vac Floating Control Document No. 155-195P25
January 12, 2018
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Product or company names mentioned herein may be the trademarks of their respective owners.
© 2018 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
USA
+ 1 847-215-1000
Your feedback is important to us. If you have comments
about this document, please send them to
sbt_technical.editor.us.sbt@siemens.com
Document No. 155-195P25
Printed in the USA
Page 5
Start-Up
Check the wiring and the position indication.
Position indicator at 0
(Output shaft is retracted)
Position indicator at 1
(Output shaft is extended)
Figure 7. Position Indicator.
Troubleshooting
Check Wiring for proper connections.
Service Kits
See Accessory and Service Kits for available accessory and service parts.
If the actuator is inoperative, replace the unit.
Disposal
The device is considered electrical and electronic equipment for disposal in
terms of the applicable European Directive and may not be disposed of as
domestic garbage.
• Dispose of the device through channels provided for this purpose.
• Comply with all local and currently applicable laws and regulations.
Dimensions
Figure 8. Dimensions of the SSB Actuator. Dimensions Shown in Inches (Millimeters).
Service envelope
Minimum access space recommended:
8 inches (200 mm) above the actuator and beside the terminal plug.