The cordless digital DECT telephone system expandable to 6 handsets Operating instructions Gigaset 2011

Operating modes
13
kap04.fm5
18.7.99
Gigaset 2011 Comfort, GBR: A30852-X1106-B307-1-
Signalling method
Telecom telephone lines can operate with the following
signalling methods:
● Dial pulsing (DP)
● Dual-tone multifrequency signalling (DTMF)
Your Gigaset 2011 is set to DTMF signalling by default.
Checking the signalling method of your telephone line
Setting the signalling method
(
t
means: scroll with
u
,
confirm with
x
)
Z
OK
If your telephone line is connected to a digital
switch, you can use both dial pulsing and DTMF
signalling. In this case, leave the default DTMF
setting or reset it, for example, after relocating
your handset.
c
Press the Talk key. You will hear the dial tone.
o
Press any digit, e.g. 2. If you still hear the same dial tone,
you must switch the signalling method to dial pulsing
(DP).
.
t
Service Initiate the procedure.
#1
Initiate the base function.
o
Enter the four-digit base code (factory default: "0000")
(➔ page 43).
u
@33
x
Set to dial pulsing.
or
u
@37
x
Set to DTMF.
REDIAL
SET
REDIAL
SET