Data Sheet for Product

Technical Bulletin Powers Controls TH 192 Adapter Kits
Document Number 155-231P25
Rev. 2, December, 2001
Page 6 Siemens Industry, Inc.
Required Parts for Installation
A. Terminal Plate (5-hole)
B. (2) Terminal Fitting
C. (2) Holder
D. (2) Gasket
E. (2) No. 6-32 × 9/16-inch
Long Flat Head Screw
F. (4) Tube Retainer
G. (2) 5/32-inch (4 mm) Plastic
Tube (Soft) and Coil
H. Multi-slotted Plate
J. (2) No. 10 × 1-1/2 inch
Sheet Metal Screw
*K. Adapter Frame
*L. Adapter Base
*P. (2) Plug-in Adapter
*Items not shown. See Figure 2 for proper installation.
Figure 6. Powers Controls "D" Model 5, HU 190, TT 180, HT 190 Flush Box.
Surface Mounting
Flush Box
Required Parts for Installation
F. (4) Tube Retainer
G. (2) 5/32-inch (4mm) Plastic Tube (Polyethylene- Hard) and Coil
H. Multi-slotted Plate
J. (2) No. 6-32 × 1-inch Long Binder Head Screw
*Items not shown. See Figure 2 for proper installation.
*L. Adapter Base
N. (2) Tubing Adapter (5/32-inch × 5/32-inch)
*P. (2) Plug-in Adapter
Figure 7. Powers Controls TH 180,182,192 Conversion From Horizontal To Vertical Installation.