Data Sheet for Product

Powers Controls TH 192 Adapter Kits Technical Bulletin
Document Number 155-231P25
Rev. 2, December, 2001
Siemens Industry, Inc. Page 5
Figure 4. Thermostat Mounting with Universal Kit – Option 3.
A. Cover C. (4) Anchor
B. Frame D. (4) Expander Nail
Installation Instructions
1. Put the flat side of frame against wall, mark the
four hole locations and drill them 1/4-inch × 1-inch
deep.
2. Insert the anchors through the frame and into the
hole. Then drive the expander nails in. If the frame
must be removed, the nails can be removed by
turning them counterclockwise.
3. Mount cover over frame and turn each end locking
screw five turns counterclockwise.
*See Field Purchasing Guide for Energygard ordering
information.
Figure 5. Universal Kit with Thermostat and Energygard* Model P Guard.