Data Sheet for Product

Powers Controls TH 192 Adapter Kits Technical Bulletin
Document Number 155-231P25
Rev. 2, December, 2001
Siemens Industry, Inc. Page 3
Table 1. Adapter Kit Selection Chart.
Thermostat Type Type of Terminal
Figure
Number
Use Kit No. 192-
300
483
484
POWERS CONTROLS
TH 192 With Guard
— 5
POWERS CONTROLS "D"
Model 5, HU 190, TT 180, HT 190
Flush 6
X
POWERS CONTROLS
TH 180, 182, 192 to convert from
horizontal to vertical installation
Flush Box 7
X
Surface 7
X
HONEYWELL
HO, HP, TO, TP, TRO 900
Surface Box 8
X
Flush Box 9
X
HONEYWELL
TP 410, 910 to 924, 933
Flush Banjo 10
X
Mortar Joint 11
X
HONEYWELL
TP 901 A, B
Flush Fitting 12
X
Plaster Back 13
X
HONEYWELL TP 901 C Mullion or Partition 14
X
HONEYWELL TP 931 Flush Electrical Box 15
X
HONEYWELL
TP 970 to 974
Shallow Wall Box with
Plaster Ring
16
X
Deep Wall Box 17
X
JOHNSON
T400,401,403,432,460,465,
H101, 102,103,105
Flush Fitting 19
X
Old Round Head 21
X
JOHNSON
H & T 4000, 5000
Surface Fitting
18 X
Flush Box
20 X
ROBERTSHAW
T18, T19, 32
Flush Box
22 X
ROBERTSHAW
H 10, 50, 52, T15, 16, 21, 25, 26,
30, 51, 52,
Surface Fitting
23 X
Mortar Joint
24 X
BARBER COLMAN
TK1001, 1101, 1201,1301,
1501 Thru 1513,1521 Thru 1525
Surface Box
26 X
Flush Electrical Box
28 X
Mortar Joint
27 X
SWAN, BISHOP, BABCOCK Flush Fitting
21 X
DRAEGER (ITT), UPC See Note
- X
Not listed in this Bulletin
0.125 O. D. Copper Tubing
Terminal Head Removed
4 X
0.187 O. D. Copper Tubing
Terminal Head Removed
4 X
NOTE: On Draeger Thermostats, the air lines are normally 5/32-inch O.D. plastic tubing and the multi-slotted plate
can be mounted using slots 1 and 14. On UPC Thermostats, the air lines are normally 1/4-inch O.D. plastic
tubing and the multi-slotted plate can be mounted using slots 12 and 13.