Data Sheet for Product

Technical Bulletin Powers Controls TH 192 Adapter Kits
Document Number 155-231P25
Rev. 2, December, 2001
Information in this publication is based on current specifications. The company reserves the right to make changes in specifications and models as
design improvements are introduced. Powers and
Free Energy Band are registered trademarks of Siemens Industry, Inc. Product or company
names mentioned herein may be the trademarks of their respective owners. © 2001 Siemens Industry, Inc.
Siemens Industry, Inc.
Building Technologies Division
1000 Deerfield Parkway
Buffalo Grove, IL 60089
+ 1 847-215-1000
Your feedback is important to us. If you have
comments about this document, please send them
to [e-mail]
Document No. 155-231P25
Printed in the U.S.A.
Page 12
Required Parts for Installation
F. (4) Tube Retainer
G. (2) 5/32-inch (4 mm) Plastic Tube (Soft) and Coil
H. Multi-slotted Plate
J. (2) No. 10 × 1-1 1/2 inch Sheet Metal Screw
*L. Adapter Base
M. (2) Rubber Connecting Tube
N. (2) Tubing Adapter (1/4-inch x 5/32-inch)
*P. (2) Plug-in Adapter
*Items not shown. See Figure 2 for proper installation.
Required Parts for Installation
F. (2) Tube Retainer
G. (2) 5/32-inch (4 mm) Plastic Tube (Polyethylene- Hard) and Coil
H. Multi-slotted Plate
J. (2) No. 6-32 × 1-inch Binder Head Screw
*L. Adapter Base
*P. Plug-in Adapter
*Items not shown. See Figure 2 for proper installation.
Figure 26. Barber Colman TK Series TK1001, 1101,
1201, 1301, 1501 through 1513, 1521 through 1525
Surface Box.
Figure 27. Barber Colman TK Series Mortar Joint.
Required Parts for Installation
*F. (2) Tube Retainer
G. (2) 5/32-inch (4 mm) Plastic Tube (Polyethylene- Hard) and Coil
H. Multi-slotted Plate
J. (2) No. 6-32 × 1-1/2 inch Pan Head Screw
*L. Adapter Base
N. (2) Tubing Adapter (1/4-inch × 5/32-inch or 5/32-inch × 5/32- inch)
*P. Plug-in Adapter
*Items not shown. See Figure 2 for proper installation.
Figure 28. Barber Colman TK Series TK1001, 1101, 1201, 1301, 1501 thru 1513, 1521 through 1525
Flush Electrical Box.