User Manual

4
Siemens A6V10733768_en--_b
2020-04-29
Security
CAUTION
National safety regulations
Failure to comply with national safety regulations may result in personal injury and property
damage.
●
Observe national provisions and comply with the appropriate safety regulations.
Engineering
● The device offers plug & play functionality.
● The device receives its power from the connected room automation station via the KNX
PL-Link interface, or from the jack connector.
● Engineering and commissioning using the ABT (Automation Building Tool) tool and SSA
(Setup & Service Assistant) tool.
Mounting
● The devices are suitable for wall mounting and panel mounting.
● Recommended height: 1.50 m above the floor.
● Do not mount the devices in recesses, shelves, behind curtains or doors, or above or
near heat sources.
● Avoid direct solar radiation and drafts.
● Seal the conduit box or the installation tube if any, as air currents can affect sensor
readings.
● Adhere to allowed ambient conditions.
Installation