User Manual

Desigo workflow, tools and programming
Desigo Xworks Plus (XWP)
4
CM110664en_07 49 | 351
The Xworks Hierarchy Viewer shows the technical hierarchy per PX and the technical hierarchy as it is
shown, e.g., in the generic view in Desigo CC.
You can define the user designation (UD) and the free designation (FD). You can define the structure of
the user designation with the field lengths and the separators and assign the data points in the structure of
the user designation. You can verify the consistency of the user designation and free designation in the
entire project and assign the technical designation (TD = default value), the user designation (UD) or the
free designation (FD) to the object name (ON).
Xworks Network Configurator
The Xworks Network Configurator lets you define the network topology. You can define LON, IP networks
and network segments, assign and address automation stations to the corresponding segments, and define
automation stations and routers.
You can define several sites in a project. The network check verifies all sites in the project. You can verify
all automation stations that have been defined in the Automation Building Tool (ABT) for correct and
unique addresses, and document it in the network report.